» Securing Local Area Networks

EnsurepassHere you will find answers to Securing Local Area Networks Questions Question 1 You suspect an attacker in your network has configured a rogue layer 2 device to intercept traffic from multiple VLANS, thereby allowing the attacker to capture potentially sensitive data. Which two methods will help to mitigate this type of activity? (Choose two) A. Turn off all trunk ports and manually configure each VLAN as required on each port B. Disable DTP on ports that require trunking C. Secure the Read more […]

» Access list Questions

EnsurepassQuestion 1 Which statement best describes the Turbo ACL feature? (Choose all that apply) A. The Turbo ACL feature processes ACLs into lookup tables for greater efficiency. B. The Turbo ACL feature leads to increased latency, because the time it takes to match the packet is variable. C. The Turbo ACL feature leads to reduced latency, because the time it takes to match the packet is fixed and consistent. D. Turbo ACLs increase the CPU load by matching the packet to a predetermined list.   Answer: Read more […]

» Security Fundamentals

EnsurepassHere you will find answers to Security Fundamentals Question 1 Which classes does the U.S. government place classified data into? (Choose three) A. SBU B. Confidential C. Secret D. Top-secret Answer: B C D Explanation Data should be classified so that administrators can do their best to secure that data. Below is a common way to classify data that many governments, including the military, use: Unclassified: Data that has little or no confidentiality, integrity, or availability requirements Read more […]

» Implementing Intrusion Prevention

EnsurepassHere you will find answers to Implementing Intrusion Prevention Questions Question 1 When configuring Cisco IOS login enhancements for virtual connections, what is the “quiet period”? A. A period of time when no one is attempting to log in B. The period of time in which virtual logins are blocked as security services fully initialize C. The period of time in which virtual login attempts are blocked, following repeated failed login attempts D. The period of time between successive Read more […]

» Authentication and Encryption 2

EnsurepassHere you will find answers to Authentication and Encryption – Part 2 // // Question 1 What two statements are true about AES-CCMP? (Choose two) A. It is an encryption algorithm used in the 802.11i security protocol. B. It is defined in 802.1X. C. It is the encryption algorithm used in TKIP implementations. D. It is required in WPA. E. It is required in WPA2.   Answer: A E Explanation Advanced Encryption Standard (AES) is the cipher system used by RSN. It is the equivalent of Read more […]

» Miscellaneous Questions

EnsurepassHere you will find answers to Miscellaneous Questions // // Question 1 Which limitation applies to the use of the Cisco WLAN Solution Management over Wireless feature? A. Controllers must be managed using only secure protocols (that is, SSH and HTTPS), not non secure protocols (that is, HTTP and Telnet). B. Read-write access is not available; only read-only access is supported. C. Uploads and downloads from the controller are not allowed. D. Wireless clients can manage other controllers Read more […]

» Authentication and Encryption

EnsurepassHere you will find answers to Authentication and Encryption Questions Question 1 What are three primary components that describe TKIP? (Choose three) A. Broadcast Key Rotation B. Dynamic WEP C. Message Integrity Check D. Per-Packet Key Hashing E. Symmetric Key Cipher F. WPA2 Enterprise Mode   Answer: A C D Explanation TKIP offers three advantages over WEP: * Per packet keying: Each packet is generated using a unique key so it is much more difficult to get from repetitive data back Read more […]

» Troubleshooting Wireless Networks

EnsurepassHere you will find answers to Troubleshooting Wireless Networks Questions // // Question 1 What is the facility level of FTP Daemons? A. 10 B. 11 C. 12 D. 15   Answer: B Explanation Syslog messages are broadly categorized on the basis of the sources that generate them. These sources can be the operating system, the process, or an application. These categories, called facility, are represented by integers. In other words, facility refers to the source of the message (such as a Read more […]

» Cisco Mobility Express

EnsurepassHere you will find answers to Cisco Mobility Express Questions // // Question 1 Which two tasks does RRM routinely perform? (Choose two) A. antenna selection B. AP address assignment C. channel assignment D. encryption method assignment E. transmit power control   Answer: C E Explanation Radio resource management (RRM) is a management control system designed to eliminate or reduce co-channel interference in wireless systems. The objective of RRM is to optimize the availability Read more […]

» Wireless Control System

EnsurepassHere you will find answers to Wireless Control System Questions // // Question 1 Which command path correctly describes how to access the Cisco WCS 5.0 ability to troubleshoot clients? A. Tools -> Clients -> select displayed client’s MAC address B. Tools -> Clients -> enter client’s MAC address C. Monitor -> Clients -> select displayed client’s MAC address D. Monitor -> Clients -> enter client’s MAC address   Answer: D Explanation You can begin Read more […]

» Wireless Client

EnsurepassHere you will find answers to Wireless Client Questions Question 1 When creating new configuration profiles in Cisco Secure Services Client, in what format are the files saved? A. .RTF B. .HTML C. .TXT D. .XML E. .XTML   Answer: D Explanation The Cisco Secure Services Client (Cisco SSC) generates an XML file that can be easily deployed network-wide to all client machines. This process is very secure and scalable, and still flexible enough to let users create their own personal connection Read more […]

» Wireless Security

EnsurepassHere you will find answers to Wireless Security Questions // // Question 1 Cisco Client Management Frame Protection is running on a mobility group with two controllers. Which two MFP requirements protect the network? (Choose two) A. forces clients to authenticate, using a secure EAP method only B. implements the validation of wireless management frames C. requires CCXv5 D. requires the use of a non-broadcast SSID E. requires CCXv4   Answer: B C Explanation In order to use client Read more […]

Proudly powered by WordPress   Premium Style Theme by www.gopiplus.com