Get Full Version of the Exam
http://www.EnsurePass.com/JN0-102.html
Question No.241
Referring to the exhibit, you want to block HTTP access to Web-Server from the subnet where Mal-User is located. All other traffic should be permitted. Which firewall filter configuration do you use?
-
[edit firewall family inet filter STOP-MAL-USER] user@router# show term one {
from {
source-address { 200.200.200.0/24;
}
destination-address { 100.100.100.10/32;
}
protocoltcp; destination-port http;
}
then accept;
}
term two { then { reject;
}
}
-
[edit firewall family inet filter STOP-MAL-USER] user@router# show term one {
from {
source-address { 100.100.100.0/24;
}
destination-address { 200.200.200.1/32;
}
protocoltcp;
destination-port http;
}
then accept;
}
term two { then { reject;
}
}
-
[edit firewall family inet filter STOP-MAL-USER] user@router# show term one {
from {
source-address { 100.100.100.0/24;
}
destination-address { 200.200.200.1/32;
}
protocoltcp; destination-port http;
}
then reject;
}
term two { then { accept;
}
}
-
[edit firewall family inet filter STOP-MAL-USER] user@router# show term one {
from {
source-address { 200.200.200.0/24;
}
destination-address { 100.100.100.10/32;
}
protocoltcp; destination-port http;
}
then reject;
}
term two { then { accept;
}
}
Correct Answer: D
Question No.242
A network administrator would like to view detailed interface status, properties, statistics, errors, and CoS packet counters. Which operational command will display this information?
-
show interfaces extensive
-
show interfaces
-
show configuration interfaces
-
show interface status
Correct Answer: A
Question No.243
Which statement is true regarding the Network Time Protocol (NTP) on Junos devices?
-
MD5 authentication is supported by the Junos OS.
-
Server mode is not supported by the Junos OS.
-
The Junos OS can provide a primary time reference.
-
The Junos OS does not support the use of a boot server.
Correct Answer: A
Question No.244
Which command will display only direct routes?
-
show route
-
show route inet.0 direct
-
show ip route direct
-
show route protocol direct
Correct Answer: D
Question No.245
Exhibit
[edit routing-options] user@router# show static {
defaults { metric 10;
preference 10;
}
route 10.10.10.0/24 { next-hop 192.168.100.1;
qualified-next-hop 192.168.200.1;
preference 6;
}
metric 8;
}
}
Exhibit
Given the configuration shown in the exhibit, which statement is correct about traffic matching the route 10.10.10.0/24?
-
It will be forwarded to 192.168.100.1 using a metric of 10.
-
It will be forwarded to 192.168.100.1 using a metric of 8.
-
It will be forwarded to 192.168.200.1 using a metric of 8.
-
It will be forwarded to 192.168.200.1 using a metric of 10.
-
Correct Answer: C
Question No.246
What is the default protocol preference for OSPF internal routes?
A. |
10 |
B. |
15 |
C. |
150 |
D. |
160 |
Correct Answer: A
Question No.247
Exhibit
[edit firewall family inet filter COS-CLASSIFIER] user@router# show
term MANAGER { from {
source-address { 192.168.200.0/25;
}
destination-address { 100.100.100.1/32;
}
}
then {
forwarding-class expedited-forwarding; accept;
}
}
term ALL-OTHER-TRAFFIC {
then accept;
}
[edit interfaces ge-0/0/1] user@router# show
unit 0 { familyinet { filter {
input COS-CLASSIFIER;
}
address 192.168.200.1/24;
}
}
Exhibit
Referring to the exhibit, which type of classifier is being used in this CoS configuration?
-
behavior aggregate
-
policer
-
multifield
-
forwarding policy
Correct Answer: C
Question No.248
When using the monitor traffic command on Junos devices, which UNIX-based utility is accessed?
-
snoop
-
tcpdump
-
monitor
-
tail
Correct Answer: B
Question No.249
You have a network containing 120 routers. You must establish and maintain connectivity between the loopback interfaces of all routers. Because of the critical services using the network, you need redundancy and fast failover. Which routing protocol should you use in this scenario?
-
OSPF
-
RIP
-
BGP
-
static
-
Correct Answer: A
Question No.250
There are three static routes in the routing table that need to be announced to your OSPF peers. Which method is used to accomplish this?
-
Apply an import policy to OSPF that injects the static routes into OSPF.
-
Apply an import policy to the static routes that injects the static routes into OSPF.
-
Apply an export policy to the static routes that injects the static routes into OSPF.
-
Apply an export policy to OSPF that injects the static routes into OSPF.
Correct Answer: D
Get Full Version of the Exam
JN0-102 Dumps
JN0-102 VCE and PDF