[Free] 2019(Nov) EnsurePass Juniper JN0-102 Dumps with VCE and PDF 211-220

Get Full Version of the Exam
http://www.EnsurePass.com/JN0-102.html

Question No.211

You have been asked to develop an application that uses only connection-oriented protocols. Which two protocols can you use? (Choose two.)

  1. PPP

  2. UDP

  3. TCP

  4. ICMP

Correct Answer: AC

Question No.212

Which network mask is the equivalent of 255.255.248.0?

A.

/20

B.

/21

C.

/22

D.

/23

Correct Answer: B

Question No.213

Exhibit interfaces { ge-0/0/8 { unit 0 { family inet {

address 192.168.1.1/24;

}

}

}

ge-0/0/9 { unit 0 { family inet {

address 192.168.10.1/24;

}

}

}

}

Exhibit

Referring to the exhibit, which command would you use to add an additional address to the ge- 0/0/9.0 interface?

  1. [edit interfaces ge-0/0/9 unit 0] user@router# set family inet address /24

  2. [edit interfaces ge-0/0/9 unit 0]

    user@router# set family inet secondary-address /24

  3. [edit interfaces ge-0/0/9 unit 0]

    user@router# set family inet address /24 secondary

  4. [edit interfaces ge-0/0/9 unit 0]

user@router# set family inet address-secondary /24

Correct Answer: A

Question No.214

Exhibit [edit interfaces]

user@router# show

lo0 { unit 0 {

familyinet { filter {

input protect-loopback;

}

address 192.168.100.1/32;

}

}

}

Exhibit

Given the configuration shown in the exhibit, what is the function of the protect-loopback filter?

  1. to protect the Routing Engine

  2. to protect all interfaces on the device

  3. to protect the Packet Forwarding Engine

  4. to protect the management interface

Correct Answer: A

Question No.215

Exhibit

user@routergt; show route protocol static

inet.0: 12 destinations, 12 routes (12 active, 0 holddown, 0 hidden)

= Active Route, – = Last Active, * = Both 192.168.1.128/27 *[Static/5] 00:03:13

gt;to 10.20.106.10 via fe-0/0/5.1

192.168.1.144/29 *[Static/5] 00:03:13

gt;to 10.20.14.131 via ge-0/0/0.0 192.168.1.192/27 *[Static/5] 00:03:13

gt;to 10.18.1.1 via ge-0/0/1.0 192.168.1.128/28 *[Static/5] 00:01:06

gt;to 10.20.14.130 via ge-0/0/0.0

Exhibit

Given the routing entries shown in the exhibit, which next-hop IP address will be used for the destination IP address 192.168.1.159? (Assume that only static routes are available for the destination.)

A.

10.20.14.130

B.

10.18.1.1

C.

10.20.14.131

D.

10.20.106.10

Correct Answer: D

Question No.216

What are three benefits of class of service? (Choose three.)

  1. It can make a slow network faster.

  2. It can prioritize latency-sensitive traffic.

  3. It can eliminate congestion.

  4. It can control congestion.

  5. It can allocate bandwidth for different classes of traffic.

Correct Answer: BDE

Question No.217

What is a route filter?

  1. a list of prefixes that can be configured in a policy

  2. a single prefix that is configured separately, and can be referenced in a policy

  3. a list of prefixes that is configured separately and can be referenced in a policy

  4. a single prefix that can be configured within a policy

Correct Answer: C

Question No.218

You issue the command telnet interface ge-1/1/0 10.10.10.1 source 192.168.100.1 bypass- routing. Which statement is correct?

  1. The bypass-routing parameter is ignored when using private IP addressing.

  2. The telnet session will have the source IP address 10.10.10.1.

  3. The telnet session will connect to the neighboring device#39;s interface ge-1/1/0.

  4. Return traffic for the telnet session might not arrive at interface ge-1/1/0.

Correct Answer: D

Question No.219

You have been asked to create a static route with a next hop that is not directly connected to the router. Which configuration parameter enables the static route to accomplish this scenario?

  1. resolve

  2. indirect

  3. next-hop

  4. recursive

Correct Answer: A

Question No.220

You issue the ping interface t1-1/1/0 1.1.1.1 bypass-routing count 1000 rapid command. Which statement is correct?

  1. The bypass-routing parameter is used to test the density on the T1 line.

  2. The bypass-routing parameter cannot be used on a T1 interface.

  3. The bypass-routing parameter allows you to ping a host through an interface that has no route through it.

  4. The bypass-routing parameter allows you to ping a local WAN interface without generating any outbound traffic.

Correct Answer: C

Get Full Version of the Exam
JN0-102 Dumps
JN0-102 VCE and PDF

You must be logged in to post a comment.

Proudly powered by WordPress   Premium Style Theme by www.gopiplus.com