[Free] 2018(Mar) Dumps4cert Pass4sure VMware 2V0-642 Dumps with VCE and PDF 61-70

Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 Mar VMware Official New Released 2V0-642
100% Free Download! 100% Pass Guaranteed!

VMware Certified Professional 6 – Network Virtualization (NSX v6.2) Exam

Question No: 61

Which are two uses of the NSX DLR protocol address? (Choose two.)

  1. When configuring BGP the protocol address is used to forward traffic to peers.

  2. When configuringBGP the protocol address is used by the protocol to form adjacencies with peers.

  3. When configuring OSPF the protocol address is used to forward traffic to peers.

  4. When configuring OSPF the protocol address is used by the protocol to form adjacencies with peers.

Answer: B,D Explanation:

For a logical router


Click Edit at the top right corner of the window. b

Click Enable OSPF. c

In Forwarding Address, type an IP address that is to be used by the router datapath module in the hosts to forward datapath packets.


In Protocol Address, type a unique IP address within the same subnet as the Forwarding Address. Protocol address is used by the protocol to form adjacencies with the peers

From lt;https://pubs.vmware.com/NSX-6/topic/com.vmware.nsx.admin.doc/GUID- 6E985577-3629-42FE-AC22-C4B56EFA8C9B.htmlgt;

Question No: 62

When deploying a standalone NSX Edge as a Layer 2 VPN client, which port needs to be configured on the client vSphere Distributed Switch?

  1. Trunk port

  2. Span port

  3. Sink port

  4. Mirror port

Answer: A Explanation:

Referencehttps://pubs.vmware.com/NSX- 62/index.jsp?topic=/com.vmware.nsx.admin.doc/GUID-C9E2B0E4-F1C1-44A7- B142-F814F801FA42.html

Question No: 63

Which type of VPN should be configured to ensure application mobility data centers?

  1. Application VPN

  2. L2VPN

  3. IPSec VPN

  4. SSL VPN-Plus

Answer: B Explanation:

Referencehttps://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/products/ nsx/vmw-nsx-network-virtualization-design-guide.pdf(page 23)

Question No: 64

Which two methods does VMware NSX offer to integrate with third-party partners? (Choose two )

  1. Integration Manager

  2. Service Chaining

  3. VMwareNSXAPIs

  4. Universal Synchronization Service

Answer: A,C

Explanation: https://docs.vmware.com/en/VMware-NSX-for- vSphere/6.3/com.vmware.nsx.admin.doc/GUID-EA477D96-E2D3-488B-90AA- 2F19B4AE327D.html#GUID-EA477D96-E2D3-488B-90AA-2F19B4AE327D

Question No: 65

A workload was attached to a logical switch port group in Compute Cluster 1. Users are complaining that I hey can communicate with other workloads on that port group in the

cluster, but not with other workloads on different networks.

Dumps4Cert 2018 PDF and VCE

What is the most probable cause?

  1. The distributed firewall has a default rule set to deny all

  2. The Distributed Logical Router was not configured on Compute Cluster 1

  3. Compute Cluster 1 is NOT a member of the Transport Zone

  4. An NSX Edge has NOT been deployed into Compute Cluster 1

Answer: A

Question No: 66

The fact that NSX Data Security has visibility into sensitive data provides which two benefits? (Choose two )

  1. It helps address compliance and risk management requirements.

  2. It acts as a forensic tool to analyze TCP and UDP connections between virtual machines

  3. It is able to trace packets between a source and destination without requiring access to the guest OS

  4. It eliminates the typical agent footprint that exists with legacy software agents

Answer: A,D

Question No: 67

What needs to be deployed before configuring the identify Firewall?

  1. Guest Introspection

  2. Data Security

  3. Network hit inspection

  4. LDAP Integration

Answer: A

Explanation: https://docs.vmware.com/en/VMware-NSX-for- vSphere/6.2/rn/releasenotes_nsx_vsphere_624.html

Question No: 68

Which highly available Edge design would provide high bandwidth and isolation to four application networks?

  1. Four Distributed Routers (standalone mode) with one Edge Services Gateway in Active/Standby mode.

  2. One Edge Services Gateway in ECMP mode.

  3. One distributed Router (in HA mode) withtwo Edge Services Gateways in ECMP mode.

  4. Four Distributed Routers (in HA mode) with one Edge Services Gateway in Active/Standby mode.

Answer: C

Question No: 69

What is the best practice workflow for a NSX installation to support logical switching?

  1. Deploy NSX Manager, Configure Logical Switches, Register with vCenter, Deploy Controllers. Prepare hosts

  2. Deploy NSX Manager, Deploy Controllers, Configure Logical Switches, Register withvCenter, Prepare hosts

  3. Deploy NSX Manager, Register with vCenter, Prepare hosts, Deploy Controllers, Configure Logical Switches

  4. Deploy NSX Manager, Register with vCenter, Deploy Controllers, Prepare hosts, Configure Logical Switches

Answer: D

Explanation: https://docs.vmware.com/en/VMware-NSX-for- vSphere/6.3/com.vmware.nsx.install.doc/GUID-E651F026-B646-4F18-83C3- 92CAD0D9533B.html

Question No: 70

Which vSphere network object obstructs the physical network, provides access-level switching in the hypervisor and enables support tot overlay networking?

  1. Standard Switch

  2. Distributed Port Group

  3. Distributed Switch

  4. Logical Switch

Answer: C Explanation:

Referencehttps://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/products/ nsx/vmw-nsx-network-virtualization-design-guide.pdf

100% Dumps4cert Free Download!
Download Free Demo:2V0-642 Demo PDF
100% Dumps4cert Free Guaranteed!
2V0-642 Dumps

Dumps4cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

You must be logged in to post a comment.

Proudly powered by WordPress   Premium Style Theme by www.gopiplus.com