[Free] 2018(Aug) Ensurepass Microsoft 70-686 Dumps with VCE and PDF 61-70

Ensurepass.com : Ensure you pass the IT Exams
2018 Aug Microsoft Official New Released 70-686
100% Free Download! 100% Pass Guaranteed!

Pro: Windows 7, Enterprise Desktop Administrator

Question No: 61 – (Topic 1)

Your network has client computers that run Windows 7. A custom Web-based application requires specific security settings. You need to prevent users from permanently modifying their Internet Explorer browsers security settings.

What should you do?

  1. Reset the Internet Explorer settings

  2. Restore the advanced settings in Internet Explorer

  3. Use Windows Internet Explorer Maintenance (IEM) extension settings in Preference mode

  4. Use Windows Internet Explorer Maintenance (IEM) extension settings in Normal mode

Answer: D Explanation:

Normal mode, you can configure IEM settings so that they are refreshed on users#39; computers on a periodic basis (or each time the users log in). However, users can temporarily change these settings between the times scheduled for their setting refresh. For this reason, these settings in Normal mode behave as quot;pseudo-policies.quot;

In Preference mode, you can configure IEM settings, but allow users to change these settings later by using the Internet Explorer 9 user interface. http://technet.microsoft.com/en-us/library/gg699413.aspx

Question No: 62 – (Topic 1)

You are designing a Windows 7 deployment image. You receive a baseline image over the network, from a different geographic location.

You need to verify that the baseline image is valid. Which tool should you use?

  1. ImageX

  2. the Deployment Image Servicing and Management (DISM) tool

  3. Windows Compatibility Evaluator

  4. windows System Image Manager (Windows SIM)

Answer: A Explanation:

imagex /append image_path image_file {quot;descriptionquot;}{/boot | /check | /config configuration_file.ini | /scroll | /verify}/check

Checks the integrity of the .wim file. If not provided, existing checks are removed. http://technet.microsoft.com/en-us/library/cc749447(v=ws.10).aspx

Question No: 63 – (Topic 1)

Your company is planning to deploy Windows 7 to all client computers. You have the following requirements:

Test an application to detect potential compatibility issues caused by User Account Control (UAC). Monitor an applications operating system use.

You need to select the appropriate method to detect application compatibility issues.

What should you do?

  1. Use the Setup Analysis Tool in a virtual environment.

  2. Use the standalone Setup Analysis Tool.

  3. Use the Standard User Analyzer Wizard.

  4. Use the Standard User Analyzer tool.

Answer: D Explanation:

The Standard User Analyzer (SUA) tool enables you to test your applications to detect potential compatibility issues due to the User Account Control (UAC) feature. http://technet.microsoft.com/en-us/library/cc765948(v=ws.10).aspx

Question No: 64 – (Topic 1)

When a user attempts to connect to a server named Server1 by using Remote Desktop Connection (RDC), he receives the following error message.

Ensurepass 2018 PDF and VCE

You need to assign the least amount of privilege to the user to ensure that he can connect to Server1 by using RDC.

To which group should you add the user?

  1. Add the user to the Power Users group on Server1.

  2. Add the user to the Remote Desktop Users group on Server1.

  3. Add the user to the domain Windows Authorization Access group.

  4. Add the user to the domain Remote Desktop Users group

Answer: B

Question No: 65 HOTSPOT – (Topic 1)

You are the desktop architect for an enterprise organization with client computers that run Windows 7.

You need to create a new Windows Firewall rule that will allow you to access the Disk Management snap-in of remote client computers.

Which predefined rule should you select? To answer, select the appropriate setting in the work area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

untitled

Ensurepass 2018 PDF and VCE

untitled

http://blogs.technet.com/b/server_core/archive/2008/01/14/configuring-the-firewall-for- remote-management-ofa-workgroup-server-core-installation.aspx

Question No: 66 DRAG DROP – (Topic 1)

All client computers in an organization run Windows 7 and are joined to an Active Directory Domain Services (AD DS) domain. All user objects are stored in an Organizational Unit (OU) named Contoso Users. All computer objects are stored in an OU named Contoso Computers.

You need to add a proxy server to the Microsoft Internet Explorer 9 configuration on all client computers by using the least administrative effort.

Which three actions should you perform? (To answer, move the appropriate action from the list of actions to the answer area and arrange them in the correct order.)

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

untitled

It should be create the GPO 1st, then modify it, then only apply it. Original answer from smith is the following picture.

Ensurepass 2018 PDF and VCE

untitled

Question No: 67 – (Topic 1)

Your companys network has client computers that run Windows 7. From a computer named Computer1, a user attempts to log on to the domain and receives the following message: The system cannot log you on to this domain because the system#39;s computer account in its primary domain is missing or the password on that account is incorrect. You need to ensure that the user can log on to the domain from Computer1. What should you do?

  1. Reset the password of the user account.

  2. Move the computer account for Computer1 to the Computers container.

  3. Run netdomcomputername computer1.

  4. Remove Computer1 from the domain and rejoin Computer1 to the domain.

Answer: D Explanation:

Re-create the computer account, join a workgroup, and then rejoin the domain. Refer to http://support.microsoft.com/kb/810497

Question No: 68 DRAG DROP – (Topic 1)

You are the desktop architect for an enterprise organization with computers that run Windows 7.

You need to create a Group Policy object (GPO) to prevent Windows Explorer from starting until all logon scripts have finished.

Which setting should you select? To answer, select the appropriate setting in the work area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Question No: 69 – (Topic 1)

Your company has client computers that run Windows XP Professional.

You are planning to install Windows 7 Enterprise on the existing client computers.

You need to design a user state migration strategy that minimizes network bandwidth and server use when user data is being migrated.

What should you do?

  1. Use the Refresh Computer method and a hard-link migration store.

  2. Use the Refresh Computer method and a compressed migration store.

  3. Use the Replace Computer method and a hard-link migration store.

  4. Use the Replace Computer method and a compressed migration store.

Answer: A Explanation:

A hard-link migration store enables you to perform an in-place migration where all user state is maintained on the computer while the old operating system is removed and the new operating system is installed; this is why it is best suited for the computer-refresh scenario.

http://technet.microsoft.com/en-us/library/dd560753(v=ws.10).aspx

Refresh Scenario

Similar to a new installation, the refresh scenario performs a clean setup. The difference is that the target computer already contains Windows, for which files and settings will be preserved (installed applications are not taken into consideration). This scenario is especially useful in the event that preserving the user state is a priority. It still leverages the consistency benefits that come through a new installation. You can automate this scenario

with the latest version of the User State Migration Tool (USMT 4.0), which will collect pertinent data for each user state found in the system, and restore it after the clean installation is performed.

Replace Scenario

This is similar to the refresh scenario, except the target system is a new computer that does not yet contain any files or settings. The scenario consists of conducting a new installation on the target computer, and then using the USMT 4.0 to transfer files and settings from the old computer. You can run this scenario side-by-side with an older system running Windows XP or

Windows Vista.

http://technet.microsoft.com/en-us/magazine/hh124549.aspx Hints:

Install on existing client computer = refresh Replace a new client computer = Replace

Question No: 70 – (Topic 1)

Your company has an Active Directory Domain Services (AD DS) forest with a single domain. A server has the Windows Deployment Services (WDS) role installed. You create a Windows 7 image.

You plan to use the Lite Touch Installation deployment method to deploy the Windows 7 image.

You need to design a deployment strategy that will install an image on unknown client computers only if administrative approval is granted.

What should you do?

  1. Create a multicast transmission for the Windows 7 image.

  2. Use an Auto-Add policy on the WDS server.

  3. Create a unicast transmission for the Windows 7 image.

  4. Use DHCP rogue detection on the WDS server.

Answer: B

Explanation:

http://technet.microsoft.com/en-us/library/cc731409(v=ws.10).aspx#BKMK_2

Ensurepass 2018 PDF and VCE

untitled

100% Ensurepass Free Download!
70-686 PDF
100% Ensurepass Free Guaranteed!
70-686 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

You must be logged in to post a comment.

Proudly powered by WordPress   Premium Style Theme by www.gopiplus.com