TS: Windows 7, Configuring
Question No: 291 – (Topic 3)
You have two computers named Computer1 and Computer2 that run Windows 7. The network is configured as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that both computers can connect to the Internet. What should you do?
On both computers, set the subnet mask to 255.255.255.255.
On both computers, set the default gateway to 192.168.0.254.
On both computers, set the default gateway to 220.127.116.11.
On the internal interface of the firewall and on both computers, set the subnet mask to 255.255.0.0.
Explanation: Need to make the default gateways for both computers match the Internal IP
Address of the Firewall.
Question No: 292 – (Topic 3)
You need to configure a computer to encrypt all inbound connections by using IPSec. What should you do?
From Network and Sharing Center, click Connect to a network.
From Network and Sharing Center, click Set up a new connection or network.
From Windows Firewall with Advanced Security, click Inbound Rules and then click New Rule.
From Windows Firewall with Advanced Security, click Connection Security Rules and then click New Rule.
Answer: D Explanation:
Connection Security Rules
Connection security rules are a special type of rule that deal with authenticated and encrypted traffic. You can use connection security rules to manage how communication occurs between different hosts on the network. You use the New Connection Security Rule Wizard, to create connection security rules. Connections can be authenticated using the Kerberos V5 protocol requiring a domain computer and user account or a domain computer account. If you select advanced properties, connections can be authenticated using NTLMv2, computer certificates from a particular certificate authority (CA) or using a pre- shared key.Connection Security Rules and IPSec policies The relationship between connection security rules and IPSec policies is similar to the relationship between AppLocker and Software Restriction Policies. Both sets of rules do similar things, but the ones that you use depend on the operating systems used by the client computers in your organization. All editions of Windows 7 and Windows Vista support connection security rules, but Windows XP does not.
Question No: 293 – (Topic 3)
You have a computer named Computer1 that runs Windows 7. Computer1 has Remote Desktop enabled. Computer1 has a shared printer named Printer1.
A group named HRUsers is a member of the Remote Desktop Users group. Only HRUsers has access to Printer1. A user named User1 is a member of HRUsers.
You need to configure the computer to meet the following requirements:
->Allow User1 to print to Printer1
->Prevent User1 from establishing Remote Desktop sessions to Computer1
->Allow other members of HRUsers to connect to Computer1 by using Remote Desktop
What should you do?
Remove User1 from the HRUsers group.
Remove HRUsers from the Remote Desktop Users group.
Assign User1 the Deny log on through Remote Desktop Services user right.
Assign User1 the Deny access to this computer from the network user right. Assign HRUsers the Allow log on locally user right.
Question No: 294 – (Topic 3)
You have two computers named Computer1 and Computer2. Computer1 runs Windows Vista. Computer2 runs Windows 7.
You plan to use User State Migration Tool (USMT) 4.0 to migrate user profiles and data from Computer1 to Computer2.
You need to prevent some system settings from being migrated. You must achieve this goal by using the minimum amount of administrative effort.
Which file should you modify?
Answer: A Explanation: Config.xml
This file is different from the other migration files as it is used to exclude features from the migration. You can create and modify the Config.xml file using ScanState.exe with the
/genconfig option.NOT MigDocs.xmlThis file contains information on the location of user documents.NOT MigUser.xmlMigUser.xml This file contains rules about user profiles and user data. The default settings for this file migrate all data in My Documents, My Video, My Music, My Pictures, desktop files, Start Menu, Quick Launch settings, favorites, Shared Documents, Shared Video, Shared Music, Shared desktop files, Shared Pictures, Shared Start menu, and Shared Favorites. This file also contains rules that ensure that all the following file types are migrated from fixed volumes: .qdf, .qsd, .qel, .qph, .doc, .dot, .rtf,
.mcw, .wps, .scd, .wri, .wpd, .xl*, .csv, .iqy, . dqy, .oqy, .rqy, .wk*, .wq1, .slk, .dif, .ppt*,
.pps*, .pot*, .sh3, .ch3, .pre, .ppa, .txt, .pst, .one*, .mpp, .vsd, .vl*, .or6, .accdb, .mdb, .pub,
.xla, .xlb and .xls. The asterisk ( *) represents zero or more characters.NOT MigApp.xmlThis file contains rules about migrating application settings. These include Accessibility settings, dial-up connections, favorites, folder options, fonts, group membership, Open Database Connectivity (ODBC) settings, Microsoft Office Outlook Express mailbox files, mouse and keyboard settings, phone and modem options, Remote Access Service (RAS) connection phone book files, regional options, remote access, screen-saver settings, taskbar settings, and wallpaper settings.User State Migration ToolUSMT 4.0 is a command-line utility that allows you to automate the process of user profile migration. The USMT is part of the Windows Automated Installation Kit (WAIK) and is a better tool for performing a large number of profile migrations than Windows Easy Transfer. The USMT can write data to a removable USB storage device or a network share but cannot perform a direct side-by-side migration over the network from the source to the destination computer. The USMT does not support user profile migration using the Windows Easy Transfer cable. USMT migration occurs in two phases, exporting profile data from the source computer using ScanState and importing profile data on the destination computer using LoadState.
Question No: 295 – (Topic 3)
Your network contains an Intrasite Automatic Tunnel Addressing Protocol (ISATAP) router. You run Ipconfig as shown in the exhibit. (Click the Exhibit button.)
Other users on the network receive an IPv6 address for ISATAP.
You need to ensure that your computer receives an IPv6 address for ISATAP. What should you do?
Run Ipconfig /renew6.
Run Ipconfig /setclassid6.
Start the Net.TCP Port Sharing service.
Start the Internet Protocol Helper (IP Helper) service.
Explanation: Internet Protocol Helper (IP Helper) service
Provides tunnel connectivity using IPv6 transition technologies (6to4, ISATAP, Port Proxy, and Teredo), and IPHTTPS. If this service is stopped, the computer will not have the enhanced connectivity benefits that these technologies offer. Internet Protocol Helper (IP Helper) assists network administration of the local computer by enabling applications to retrieve information about the network configuration of the local computer, and to modify that configuration. IP Helper also provides notification mechanisms to ensure that an application is notified when certain aspects of the local computer network configuration change.
Question No: 296 – (Topic 3)
You have a computer that runs Windows 7 and Windows Internet Explorer 8.
You open Internet Explorer and access a Web site. The Web site displays a page that has misaligned text and graphic image. You verify that the Web page displays correctly in previous versions of Internet Explorer. You need to view the Web page correctly.
What should you do?
Modify the text size.
Enable Caret Browsing.
Enable Compatibility View.
Disable the SmartScreen Filter.
Answer: C Explanation:
Internet Explorer Compatibility View
Internet Explorer Compatibility View allows sites designed for previous versions of Internet Explorer to display correctly for users of Internet Explorer 8. You can enable Compatibility View for a page by clicking the broken page icon at the end of the address bar. You can configure Compatibility View settings through the Compatibility View Settings dialog box. You can access this dialog box by clicking Compatibility View Settings on the Tools menu of Internet Explorer.
Question No: 297 – (Topic 3)
You have a computer that runs Windows 7.
You install Windows XP in a new partition on the computer and discover that you can no longer start Windows 7.
You need to start Windows 7 in the minimum amount of time. What should you do?
From Windows XP, modify the default path in the boot.ini file.
From Windows XP Recovery Console, run the Fixboot command.
Start the computer from the Windows 7 installation media and select Install now.
Start the computer from the Windows 7 installation media and run Startup Repair.
Explanation: When configuring a new computer to boot between multiple operating systems, it is also necessary to install operating systems in the order that they were released. For example, if you want to boot between Windows XP and Windows 7 on a new computer, you need to install Windows XP before you install Windows 7. If you install Windows XP after Windows 7, the Windows XP installation routine cannot recognize the Windows 7 operating system installation and the computer only boots into Windows XP. It is possible to repair the computer from this point using Windows 7 startup repair so that it dual-boots, but the simplest course of action is just to install the operating systems in the order in which they were released
Question No: 298 – (Topic 3)
You need to back up your Encrypting File System (EFS) certificate. You must achieve this goal in the minimum amount of time.
What should you do?
Run Cipher.exe /x.
Run Ntbackup.exe /p.
From Backup and Restore, click Back up now.
From Backup and Restore, click Create a system image.
Answer: A Explanation:
Cipher is used to manage certificates.
NOT Backup and Restore:Only the EFS certificate needs to be backed up and time is a factor.
Question No: 299 – (Topic 3)
You have a computer that runs Windows 7.
You need to configure an application to connect to the computer by using the IPV6 loopback address.
Which address should you specify?
Answer: A Explanation: Loopback address
The loopback address (0:0:0:0:0:0:0:1 or ::1) is used to identify a loopback interface, enabling a node to send packets to itself. It is equivalent to the IPv4 loopback address of
127.0.0.1. Packets addressed to the loopback address must never be sent on a link or forwarded by a router.Link-LocalLink-local addresses always begin with FE80. With the 64- bit interface identifier, the prefix for link-local addresses is always FE80::/64. An IPv6 router never forwards link-local traffic beyond the link. Nodes use link-local addresses when communicating with neighboring nodes on the same link. For example, on a single-link IPv6 network with no router, hosts use link-local addresses to communicate with other hosts on the link. Link-local addresses are equivalent to Automatic Private IP Addressing (APIPA) IPv4 addresses autoconfigured on computers that are running Windows. APIPA addresses use the 169.254.0.0/16 prefix. The scope of a link-local address is the local link. A link-local address is required for Neighbor Discovery processes and is always automatically configured, even in the absence of all other unicast addresses.
Topic 4, Volume D
Question No: 300 – (Topic 4)
A Remote Assistance session is established with a user’s computer that runs Windows 7 Enterprise.
You need to verify that a local file is encrypted with the Encrypting File System (EFS). What should you do to accomplish this goal?
the netsh command
the folder Properties window
the Services management console
the Group Policy management console
the icacls command
the User Account Control Settings Control Panel window
Local Users and Groups
Explanation: Right-click the file or folder Select Properties
Click the Advanced button under the Attributes section
If Check the box next to quot;Encrypt contents to secure dataquot; is checked, then the file is encrypted using EFS.
|Lowest Price Guarantee||Yes||No||No|
|Free VCE Simulator||Yes||No||No|