[Free] 2018(Aug) Ensurepass Microsoft 70-498 Dumps with VCE and PDF 11-20

Ensurepass.com : Ensure you pass the IT Exams
2018 Aug Microsoft Official New Released 70-498
100% Free Download! 100% Pass Guaranteed!

Delivering Continuous Value with Visual Studio 2012 Application Lifecycle Management

Question No: 11

Your development team is using the Microsoft Solution Framework (MSF) for Capability Maturity Model Integration (CMMI) Process Improvement 6.0 process template.

The team has identified all of the acceptance criteria for a new application. This data currently resides in a series of spreadsheets.

You need to enter the criteria into TFS for team traceability and tracking.

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

  1. Create test case work items for each criterion in the spreadsheet. Link the test case work items with the work item(s) for the appropriate requirements.

  2. Create Requirement work items.

  3. Create a new task work item for each criterion in the spreadsheet. Set the Triage attribute for each task work item to Information Received.

  4. Create a new quality of service test case work item for each criterion in the spreadsheet. Link the quality of service test case work items with the work item(s) for the appropriate requirements.

Answer: A,B

Question No: 12

Your development team uses Scrum as its process framework and utilizes the Microsoft Framework (MSF) for Agile Software Development 6.0 process template.

A new team member who is new to Scrum assumes the role of product owner. You need to help the new product owner prioritize the product backlog.

Which basis should you suggest the new product owner use for prioritizing the product backlog?

  1. personal preference

  2. estimated cost and effort for each requirement

  3. risk and business value of each requirement

  4. technical complexity of each requirement

Answer: C

Question No: 13

You are developing a new application. The application will require rapid changes after it is in production.

You need to implement practices that promote high quality and ensure the code is maintainable.

Which three practices should you implement? (Each correct answer presents part of the solution. Choose three.)

  1. Refactor code based on code metrics from the maintainability index.

  2. Keep the code tightly coupled.

  3. Create as few classes as possible.

  4. Create unit tests and monitor code coverage.

  5. Create as few assemblies as possible.

  6. Refactor code based on code clone analysis.

Answer: A,D,F

Question No: 14

You are a developer. Your company has a Microsoft Visual Studio Team Foundation Server (TFS) installation for a project. The TFS installation uses the Microsoft Solutions Framework (MSF) for Agile Software Development project template. The developers have standard Contributor permissions, and the Scrum Master has Project Administrator permissions.

The project development team performs time of regression testing of all stories at the end of each release. Defects are linked to the corresponding story. The team wants to view all completed user stories for release 1 with related open defects. This query needs to appear on the home page of the web portal.

You need to create a query that includes the user story title, defect title, and the status of the defect.

Which two actions should you perform? Each correct answer presents part of the solution.

  1. Using the Query editor, create a new Flat query named Rl. Open Defects. Set Work Item

    Type to Defect, and set the State filter to lt;gt; Done.

  2. Using the Query editor, create a new direct links query named Rl. Open Defects that links user stories by using the iteration filter Under, Release 1, and related Bugs. Filter the bugs by by State lt; gt; Done.

  3. Have the Scrum master right-click the query Rl Open Defects, and select add to team favorites.

  4. As a developer, from the Query menu, right-click the query Rl Open Defects, and select add to team favorites.

Answer: B,C

Question No: 15

Your company network includes Microsoft Visual Studio Team Foundation Server (TFS) 2012 and Microsoft System Center 2012.

You need to monitor your company’s application infrastructure. What should you configure?

  1. Event Log data collector

  2. Configuration Manager

  3. Application Controller

  4. IntelliSense collector

  5. Operations Manager

Answer: E

Question No: 16 HOTSPOT

You are the lead tester for Contoso, Ltd. The company is using Microsoft Visual Studio to develop a new software product.

Management wants to test the product as it is developed. Some components that require testing have dependencies that are not yet built or are otherwise unavailable.

You need to test the components.

In the table below, identify where only a shim or a stub can be used in the situation. Make only one selection in each column.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Explanation:

C:\Users\Kamran\Desktop\image1.jpg

  • Interfaces and abstract methods. Stubs provide implementations of interfaces and abstract methods that can be used in testing. Shims can’t instrument interfaces and abstract methods, because they don’t have method bodies.

  • Internal types. Both stubs and shims can be used with internal types that are made accessible by using the assembly attribute InternalsVisibleToAttribute.

    In general, we recommend that you use stub types to isolate from dependencies within your codebase.

  • Private methods. Shims can replace calls to private methods if all the types on the method signature are visible. Stubs can only replace visible methods.

    Note:

  • A stub replaces a class with a small substitute that implements the same interface. To use stubs, you have to design your application so that each component depends only on interfaces, and not on other components. (By quot;componentquot; we mean a class or group of classes that are designed and updated together and typically contained in an assembly.)

  • A shim modifies the compiled code of your application at run time so that instead of making a specified method call, it runs the shim code that your test provides. Shims can be

used to replace calls to assemblies that you cannot modify, such .NET assemblies.

Question No: 17

You manage a geographically dispersed development team that uses the Microsoft Visual Studio Scrum 2.0 process template.

Each of the four locations has approximately six team members.

You need to optimize the team’s performance to minimize the impact of the geographic dispersion.

What should you do?

  1. Setup a persistent video conference feed between the locations.

  2. Use a phone conference line for daily standups. Use a paper-based planning board and take snapshots of the board after daily standups.

  3. Organize the teams into a scrum of scrums, in which each location has a standalone team. Work off of a single product backlog and meet regularly with the leads of each scrum team.

  4. Use electronic planning and a shared source control repository so that all team members are using a single set of sources.

Answer: C

Question No: 18

Your geographically dispersed development team is using the Microsoft Solution Framework (MSF) for Agile Software Development 6.0 process template.

You are developing an application that will function on several different types of mobile devices.

You need to ensure that developers have access to the designs for each device. What should you do?

  1. Create a Requirements work item type and attach the wireframe design.

  2. Print the storyboards’ wireframe designs and tape them to the walls of the main development center.

  3. Create a new task for each wireframe design.

  4. Create wireframes in Microsoft PowerPoint and link them to the user stories.

Answer: D

Question No: 19

You are the application architect on your team. You have a straightforward architecture consisting of an ASP.NET MVC Web Application that depends on a Class Library, which contains the Business Logic. The Business Logic uses another Class Library that contains the Data Access code.

No code in the UI should ever use the Data Access library directly. You need to enforce this architectural requirement.

Which Visual Studio tool should you use?

  1. Layer Diagram

  2. Directed Graph Document

  3. Dependency Graph

  4. UML Component Diagram

Answer: A

Question No: 20

Your development team uses the Microsoft Visual Studio Scrum 2.0 process template. You are the product owner.

Your product backlog includes a number of items that appear to have equal priority. However, the items have differing business value, complexity, and risk.

You need to order the backlog based on risk, complexity, and business value.

What should you do?

  1. Work on items with the highest ratio of business value to effort first.

  2. Work on items that have the highest effort first.

  3. Work on items that have the lowest effort first.

  4. Assign a risk factor to each product backlog item and work on items with the highest risk factor first.

  5. Work on items that have the highest business value first.

    Answer: A

    100% Ensurepass Free Download!
    70-498 PDF
    100% Ensurepass Free Guaranteed!
    70-498 Dumps

    EnsurePass ExamCollection Testking
    Lowest Price Guarantee Yes No No
    Up-to-Dated Yes No No
    Real Questions Yes No No
    Explanation Yes No No
    PDF VCE Yes No No
    Free VCE Simulator Yes No No
    Instant Download Yes No No

You must be logged in to post a comment.

Proudly powered by WordPress   Premium Style Theme by www.gopiplus.com