Administering Windows Server 2012
Question No: 161 – (Topic 2)
Your network contains a Network Policy Server (NPS) server named Server1. The network contains a server named SQL1 that has Microsoft SQL Server 2008 R2 installed. All servers run Windows Server 2012 R2.
You configure NPS on Server1 to log accounting data to a database on SQL1.
You need to ensure that the accounting data is captured if SQL1 fails. The solution must minimize cost.
What should you do?
Implement Failover Clustering.
Implement database mirroring.
Run the Accounting Configuration Wizard.
Modify the SQL Server Logging properties.
Answer: C Explanation:
In Windows Server 2008 R2, an accounting configuration wizard is added to the Accounting node in the NPS console. By using the Accounting Configuration wizard, you can configure the following four accounting settings:
-> SQL logging only. By using this setting, you can configure a data link to a SQL
Server that allows NPS to connect to and send accounting data to the SQL server. In addition, the wizard can configure the database on the SQL Server to ensure that the database is compatible with NPS SQL server logging.
-> Text logging only. By using this setting, you can configure NPS to log accounting
data to a text file.
-> Parallel logging. By using this setting, you can configure the SQL Server data link and database. You can also configure text file logging so that NPS logs simultaneously to the text file and the SQL Server database.
-> SQL logging with backup. By using this setting, you can configure the SQL Server data link and database. In addition, you can configure text file logging that NPS uses if SQL Server logging fails.
Question No: 162 HOTSPOT – (Topic 2)
You have a file server named Server1 that runs Windows Server 2012 R2.
A user named User1 is assigned the modify NTFS permission to a folder named C:\shares and all of the subfolders of C:\shares.
On Server1, you open File Server Resource Manager as shown in the exhibit. (Click the Exhibit button.)
To answer, complete each statement according to the information presented in the exhibit.
Each correct selection is worth one point.
Question No: 163 – (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain contains a RADIUS server named Server1 that runs Windows Server 2012 R2.
You add a VPN server named Server2 to the network. On Server1, you create several network policies.
You need to configure Server1 to accept authentication requests from Server2. Which tool should you use on Server1?
Routing and Remote Access
Connection Manager Administration Kit (CMAK)
Answer: C Explanation:
New-NpsRadiusClient -Name quot;NameOfMyClientGroupquot; -Address quot;10.1.0.0/16quot; – AuthAttributeRequired 0 -NapCompatible 0 -SharedSecret quot;SuperSharedSecretxyzquot; – VendorName quot;RADIUS Standardquot;
http: //technet. microsoft. com/en-us/library/hh918425(v=wps. 620). aspx http: //technet. microsoft. com/en-us/library/jj872740(v=wps. 620). aspx http: //technet. microsoft. com/en-us/library/dd469790. aspx
Question No: 164 HOTSPOT – (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the Network Policy Server role service installed.
An administrator creates a Network Policy Server (NPS) network policy named Policy1. You need to ensure that Policy1 applies to L2TP connections only.
Which condition should you modify?
To answer, select the appropriate object in the answer area.
Question No: 165 – (Topic 2)
Your network contains one Active Directory domain named contoso.com. The forest functional level is Windows Server 2012. All servers run Windows Server 2012 R2. All client computers run Windows 8.1.
The domain contains 10 domain controllers and a read-only domain controller (RODC) named RODC01. All domain controllers and RODCs are hosted on a Hyper-V host that runs Windows Server 2012 R2.
You need to identify which user accounts were authenticated by RODC1. Which cmdlet should you use?
Explanation: Gets the Active Directory accounts that are authenticated by a read-only domain controller or that are in the revealed list of the domain controller.
Reference: Get-ADDomainControllerPasswordReplicationPolicyUsage https://technet.microsoft.com/en-us/library/ee617194.aspx
Question No: 166 – (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1. DC1 is a DNS server for contoso.com. The properties of the contoso.com zone are configured as shown in the exhibit. (Click the Exhibit button.)
The domain contains a server named Server1 that is part of a workgroup named Workgroup. Server1 is configured to use DC1 as a DNS server.
You need to ensure that Server1 dynamically registers a host (A) record in the contoso.com zone.
What should you configure?
The workgroup name of Server1
The Security settings of the contoso.com zone
The Dynamic updates setting of the contoso.com zone
The primary DNS suffix of Server1
Answer: D Explanation:
When any computer or a standalone server is added to a domain as a member, the network identifies that computer with its Fully Qualified Domain Name or FQDN. A Fully Qualified Domain Name consist of a hostname and the DNs suffix separated by a 鈥? 鈥?called period. An example for this can be server01. msftdomain.com where 鈥渟erver01 is the hostname of the computer and 鈥渕sftdomain.com鈥?is the DNS suffix which follows the hostname. A complete FQDN of a client computer or a member server uniquely identifies that computer in the entire domain.
Primary DNS suffix must manually be added in Windows 8 computer to change its hostname to Fully Qualified Domain Name so that it becomes eligible to send queries and receive responses from the DNS server. Following are the steps which can be implemented to add primary DNS suffix to a Windows 8 computer hostname:
-> Log on to Windows 8 computer with administrator account.
-> From the options available on the screen click Control Panel.
-> On the opened window click More Settings from the left pane.
-> On the next window click System and Security category and on the appeared window click System.
-> On View basic information about your computer window click Change settings under Computer name, domain, and workgroup settings section.
-> On System Properties box make sure that Computer Name tab is selected and click Change button.
-> On Computer Name/Domain Changes box click More button.
-> On DNS Suffix and NetBIOS Computer Name box type in the DNS domain name as the DNS suffix to the Windows 8 computer under Primary DNS suffix of this computer field.
-> Click Ok button on all the boxes and restart the computer to allow changes to take effect.
For years, Windows DNS has supported dynamic updates, whereas a DNS client host registers and dynamically updates the resource records with a DNS server. If a host’s IP address changes, the resource record (particularly the A record) for the host is automatically updated, while the host utilizes the DHCP server to dynamically update its Pointer (PTR) resource record. Therefore, when a user or service needs to contact a client PC, it can look up the IP address of the host. With larger organizations, this becomes an essential feature, especially for clients that frequently move or change locations and use DHCP to automatically obtain an IP address. For dynamic DNS updates to succeed, the zone must be configured to accept dynamic updates:
http: //technet. microsoft. com/en-us/library/cc778792(v=ws. 10). aspx http: //technet. microsoft. com/en-us/library/cc778792(v=ws. 10). aspx http: //www. advicehow. com/adding-primary-dns-suffix-in-microsoft-windows-8/ http: //technet. microsoft. com/en-us/library/cc959611. aspx
Question No: 167 – (Topic 2)
You have a DNS server named Server1 that runs Windows Server 2012 R2. On Server1, you create a DNS zone named contoso.com.
You need to specify the email address of the person responsible for the zone. Which type of DNS record should you configure?
Start of authority (SOA)
Host information (HINFO)
Mail exchanger (MX)
Answer: A Explanation:
A SOA-record defines the responsible person for an entire zone, but a zone may contain many individual hosts / domain names for which different people are responsible. The RP- record type makes it possible to identify the responsible person for individual host names contained within the zone.
Question No: 168 – (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the File Server Resource Manager role service installed.
You configure a quota threshold as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that a user named User1 receives an email notification when the threshold is exceeded.
What should you do?
Create a performance counter alert.
Create a classification rule.
Modify the members of the Performance Log Users group.
Configure the File Server Resource Manager Options.
Answer: D Explanation:
When you create quotas and file screens, you have the option of sending e-mail notifications to users when their quota limit is approaching or after they have attempted to save files that have been blocked. If you want to routinely notify certain administrators of quota and file screening events, you can configure one or more default recipients.
To send these notifications, you must specify the SMTP server to be used for forwarding the e-mail messages.
To configure e-mail options
In the console tree, right-click File Server Resource Manager, and then click Configure options. The File Server Resource Manager Options dialog box opens.
On the E-mail Notifications tab, under SMTP server name or IP address, type the host name or the IP address of the SMTP server that will forward e-mail notifications.
If you want to routinely notify certain administrators of quota or file screening events, under Default administrator recipients, type each e-mail address.
Use the format account@domain. Use semicolons to separate multiple accounts. To test your settings, click Send Test E-mail.
Question No: 169 – (Topic 2)
You have a server named Server1 that runs Windows Server 2012 R2. You create a custom Data Collector Set (DCS) named DCS1.
You need to configure Server1 to start DCS1 automatically when the network usage exceeds 70 percent.
Which type of data collector should you create?
A performance counter alert
A configuration data collector
A performance counter data collector
An event trace data collector
Answer: A Explanation:
Performance alerts notify you when a specified performance counter exceeds your configured threshold by logging an event to the event log. But rather than notifying you immediately when the counter exceeds the threshold, you can configure a time period over which the counter needs to exceed the threshold, to avoid unnecessary alerts.
Question No: 170 DRAG DROP – (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1.
You need to create an Active Directory snapshot on DC1. Which four commands should you run?
To answer, move the four appropriate commands from the list of commands to the answer area and arrange them in the correct order.
Box 1: ntdsutil
Box 2: snapshot
Box 3: activate instance ntds Box 4: create
Create a snapshot of AD DS in Windows Server 2012 R2 by using NTDSUTIL
1 – On the domain server, open command prompt and type ntdsutil and press Enter. 2- Next, type snapshot and press Enter.
– Next, type activate instance ntds and press Enter.
– Next, type create (this create command is to generate a snapshot of my AD) and press Enter.
|Lowest Price Guarantee||Yes||No||No|
|Free VCE Simulator||Yes||No||No|