[Free] 2018(Aug) Dumps4cert CompTIA RC0-903 Dumps with VCE and PDF Download 21-30

Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 Aug CompTIA Official New Released RC0-903
100% Free Download! 100% Pass Guaranteed!

CompTIA A Recertification Exam for Continuing Education

Question No: 21 – (Topic 1)

Legacy software needs to be installed on a netbook. Which of the following is MOST likely needed in order to install the software?

  1. Lightning port

  2. Bluetooth adapter

  3. USB optical drive

  4. NFC chip

Answer: C

Topic 2, Troubleshooting (Hardware/Software)

Question No: 22 – (Topic 2)

An office printer that was working earlier in the day is no longer printing any documents. Pre-existing workstations are manually configured to print to the printer directly over the network. A technician has started to troubleshoot the problem and determines that the printer can still be seen in the network directory. The technician has also verified that the printer can print self-diagnostic pages successfully. Which of the following is the MOST likely cause of the problem?

  1. The printer#39;s IP address has changed.

  2. The network print spooler service has been restarted.

  3. quot;Perform Printer Maintenancequot; message is displayed on the printer’s LCD panel.

  4. Two or more users sent print jobs simultaneously, causing a print collision.

Answer: A

Question No: 23 – (Topic 2)

A user states there are multiple small black dots on an LCD screen. Which of the following should be done to resolve the issue?

  1. Replace monitor.

  2. Replace video card.

  3. Replace video cable.

  4. Replace power supply.

Answer: A

Question No: 24 – (Topic 2)

A technician is working on a server with high latency on the mapped network drive. Upon entry into the server room, the technician suspects an issue with one of the drives in the array. Which of the following would the technician do to resolve the problem?

  1. Reseat the drive cable in the array.

  2. Replace the RAID controller.

  3. Replace the faulty drive in the array.

  4. Reinstall the RAID drivers.

Answer: C

Question No: 25 – (Topic 2)

A technician is troubleshooting a desktop that is having intermittent issues with locking up and system errors. The technician suspects that the problem might be that not enough power is getting to the motherboard. Which of the following tools would a technician use to determine if the hypothesis is correct?

  1. POST card

  2. Loopback plug

  3. Multimeter

  4. Cable tester

Answer: C

Question No: 26 – (Topic 2)

A technician replaces a failed hard drive with a brand new one. The technician boots from a PE CD and attempts to install a custom OS build deployed from the network. The hard drive is visible in the system’s BIOS. However, once in the preinstallation environment, the drive is not recognized in the imaging process and the process fails. Which of the following is MOST likely the cause of failure?

  1. The boot CD has failed and needs to be replaced.

  2. The hard drive needs to have its configuration manually defined in the BIOS.

  3. The PC’s power supply is not providing enough power to the new hard drive.

  4. The hard drive has not been partitioned correctly.

Answer: D

Question No: 27 – (Topic 2)

A user notices the printer that is used for printing global shipper’s labels is missing columns in the printed labels. The special label stock is new and appears to be fine. Which of the following should the technician perform FIRST when troubleshooting this problem?

  1. Remove any stuck labels from the paper path

  2. Clean the pickup rollers and check them for wear

  3. Clean the print head with approved materials

  4. Replace and realign the print head

Answer: C

Question No: 28 – (Topic 2)

Ann, a user, reports her docked mobile workstation will periodically lose her network share drive and lose video to the second monitor. Which of the following is MOST likely the cause of this anomaly?

  1. The workstation battery needs to be replaced.

  2. The NIC is functioning intermittently.

  3. Failed driver updates for the workstation’s devices.

  4. The surge protector lost AC power.

Answer: D

Question No: 29 – (Topic 2)

A technician receives a call that a client’s PC is not booting after a recent test of the building’s back-up generators. When the technician arrives, it is discovered that, once powered on, there is no output display or POST beep codes. Furthermore, after 15 seconds, the system’s fans begin running much louder and faster. Which of the following is the MOST likely issue?

  1. The motherboard was damaged by the power test.

  2. The PC’s RAM was affected by ESD.

  3. The power supply was damaged and is nonfunctional.

  4. The hard drive was erased due to the power test.

Answer: A

Question No: 30 – (Topic 2)

A user, Ann, reports that her company laptop cannot pick up a wireless connection in certain areas of a building. However, users working on their laptops in the common areas have Internet connectivity. Which of the following is the MOST likely cause?

  1. Weak RF signals

  2. Out of date Ethernet driver

  3. Enabled MAC filtering

  4. Duplicate IP addresses

Answer: A

100% Dumps4cert Free Download!
RC0-903 PDF
100% Dumps4cert Pass Guaranteed!
RC0-903 Dumps

Dumps4cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

You must be logged in to post a comment.

Proudly powered by WordPress   Premium Style Theme by www.gopiplus.com