[Free] 2018(Aug) Dumps4cert CompTIA ISS-001 Dumps with VCE and PDF Download 111-120

Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 Aug CompTIA Official New Released ISS-001
100% Free Download! 100% Pass Guaranteed!

Intel庐 Server Specialist Certification Exam

Question No: 111

After running the system firmware update package on the Intel庐 Server System SR1625UR a message “BMC is in FW transfer mode” appears. Which of the following options describes the reason for this message?

  1. The BIOS needs to be updated to the latest version to match the firmware.

  2. The BMC has not updated because the BMC force update jumper is selected.

  3. Update cannot be finished because of a bad firmware file.

  4. Update is completed, but the BMC force update jumper is enabled.

Answer: D

Question No: 112

Which of the following processor families are supported in the Intel庐 Server Board WX58BP motherboard? (Select THREE).

  1. Intel庐 Xeon庐 3500

  2. Intel庐 Core鈩?i7

  3. Intel庐 Core鈩?2 Duo

  4. Intel庐 Pentium庐 D

  5. Intel庐 Xeon庐 3600

Answer: A,B,E

Question No: 113

A system administrator wants to update the firmware on AXX6DRV3GR but receives a message “ERROR 005. Update failure”. Which of the following statements could be the reason for this message?

  1. The incorrect firmware was chosen.

  2. The IPMB cable is not connected.

  3. The SGPIO cable is not connected.

  4. The SES cable is not connected.

Answer: B

Question No: 114

Which of the following are REQUIRED to be able to mix SAS and SATA drives in the Intel庐 Modular Server System MFSYS25? (Select TWO).

  1. AXXTM3SATA converters must be installed in every drive bay which will contain a SATA disk or an SSD.

  2. The Storage Control Management (SCM) firmware must be at a minimum of 3.02.

  3. SAS and SATA drives must be based on the same drive vendor, firmware, and RPM.

  4. The system firmware must be at a minimum of United Firmware Update (UFU) 5.0.

  5. The system does not support mixing SAS drives and SSDs, or SAS drives and SATA drives.

Answer: A,D

Question No: 115

A customer wants to buy the Intel庐 Modular Server System MFSYS35 with four compute modules, one management module (MFCMM), two Ethernet Switch Modules (AXXSW1GB), two Storage Compute Modules (AXXSCM3S), and six hard drives. Which solution is MOST preferred for this configuration?

  1. Two Power Modules (Non-Redundant Power) or Two Power Modules (Redundant Power)

  2. Three Power Modules (Non-Redundant Power) or Four Power Modules (Redundant Power)

  3. Three Power Modules (Non-Redundant Power) or Three Power Modules (Redundant Power)

  4. Two Power Modules (Non-Redundant Power) or Three Power Modules (Redundant Power)

Answer: B

Question No: 116

A customer has an Intel庐 Server System SR2612UR which is used for database storage. The maximum load for the server is in working hours. But from 6 p.m. till 8 a.m. the server is not in use. Which system management software would help a System Administrator to setup power-policies to save energy?

  1. Intel庐 AppUp

  2. Microsoft System Management Control

  3. Intel庐 Active System Console

  4. Intel庐 Remote Service Manager

Answer: C

Question No: 117

Which of the following Intel庐 Server Boards supports the Intel庐 AXXRMM3?

  1. Intel庐 Server Board S3420GPRX

  2. Intel庐 Server Board S3420GPLC

  3. Intel庐 Server Board S3420GPV

  4. Intel庐 Server Board S3420GPLX

Answer: D

Question No: 118

Which of the following memory types provide the maximum amount of memory for the Intel庐 Server Board S3420GPLX?

  1. UDIMM

  2. RDIMM



Answer: B

Question No: 119

A customer wants to buy an Intel庐 server system in a 1U rack chassis for a web server with Intel Intelligent Power Node Manager support. Which of the following systems support this feature?

  1. The Intel庐 Server System P4304BTLSHCN

  2. The Intel庐 Server System R1304BTLSHBN

  3. The Intel庐 Server System R1304BTSSFAN

  4. The Intel庐 Server System P4304BTSSFCN

Answer: B

Question No: 120

A customer has an Intel庐 Server System SR2625UR based on two Intel庐 Xeon庐 E5530 processors. The customer tries to power on a virtual machine in Microsoft Hyper-V Manager but gets an error: “The virtual machine could not be started because the hypervisor is not running. Verify that the processor of the physical computer has a supported version of hardware-assisted virtualisation”. Which of the following statements explains this case?

  1. Hypervisor reinstallation is required.

  2. Intel庐 Virtualisation Technology is disabled in BIOS.

  3. Intel庐 Xeon庐 5530 processor does not support virtualisation technology.

  4. The BIOS firmware version of the system is less than 48.

Answer: B

100% Dumps4cert Free Download!
100% Dumps4cert Pass Guaranteed!
ISS-001 Dumps

Dumps4cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

You must be logged in to post a comment.

Proudly powered by WordPress   Premium Style Theme by www.gopiplus.com