QUESTION 31
DRAG DROP (Topic 2)
Answer:
|
A. |
|
|
B. |
|
|
C. |
|
|
D. |
|
Answer:
QUESTION 32 (Topic 2)
If you want to change the default SCCP and SIP IP phone firmware loads a phone receives, in which location would you make this change?
|
A. |
Device Pool |
|
B. |
Device Settings > Device Defaults |
|
C. |
Device Settings > Firmware Load Information |
|
D. |
|
|
E. |
Device Settings > Device Profile |
|
F. |
Device Settings > Softkey Template |
Answer: B
Explanation:Link :
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_5_1/ccmsys/a08sip.html Explanation : firmware load only possible from Device default menu Reference : Cisco Unified Communications Manager System Guide Release 8.5(1), page- 154.
QUESTION 33 (Topic 2)
Which three characteristics are used to determine which devices go into a device pool? (Choose three.)
|
A. |
Device type |
|
B. |
Class of service |
|
C. |
Geographic proximity |
|
D. |
Extension mobility CSS |
|
E. |
User hold MOH source |
|
F. |
auto-registration CSS |
Answer: CEF
QUESTION 34 (Topic 2)
Which two SIP issues should be considered when deploying KPML? (Choose two.)
|
A. |
Additional MTP resources will be required. |
|
B. |
There will be significantly more signaling traffic on the network. |
|
C. |
Additional configuration steps will be required for SIP phone dial rules. |
|
D. |
Social engineering will be required to educate users about how to dial a call with SIP. |
|
E. |
There will be additional processing demands on the Cisco Unified Communications Manager server. |
Answer: BE
QUESTION 35 (Topic 2)
Which three events describe the relationship of an IP phone to its secondary subscriber in a Cisco Unified Communications Manager system? (Choose three.)
|
A. |
The IP Phone sends a TCP connect message. |
|
B. |
The IP Phone sends a TCP keepalive message every 30 seconds. |
|
C. |
The IP Phone sends a TCP keepalive message every 60 seconds. |
|
D. |
The IP Phone registers with the primary system when the secondary system is unavailable. |
|
E. |
The IP Phone attempts to register with the secondary system when the primary system is unavailable. |
|
F. |
The IP Phone registers with all the Cisco Unified Communications Manager subscribers in the group simultaneously, including the secondary subscriber. |
Answer: ABE
QUESTION 36 (Topic 2)
What happens when you try to configure the fourth member of a Cisco Unified CallManager group?
|
A. |
Cisco Unified CallManager Administration will display an error and replace the last entered member of the Cisco Unified CallManager group with the new entry. |
|
B. |
Cisco Unified CallManager Administration will display an error message when you attempt to add the fourth member. |
|
C. |
The fourth member will be added to the sequential list. |
|
D. |
The new member will replace the first m |
Answer: B
QUESTION 37 (Topic 2)
What is the purpose of using device pools?
|
A. |
to provide an easily modified set of system parameters for the Cisco Unified CallManager server and endpoints |
|
B. |
to provide all the IP phone parameters required for auto-registration |
|
C. |
to consolidate the dial plan for a set of IP phones in the same location |
|
D. |
to provide a convenient way to define a set of common characteristics that can be assigned to devices |
Answer: D
Explanation:device pool definition –
Device pools define sets of common characteristics for devices, the device pool structure supports the separation of user and location information. The device pool contains only device- and location-related information
QUESTION 38 (Topic 2)
How are Cisco Unified CallManager location parameters used?
|
A. |
Assign directory numbers to devices as they connect to the IP telephony network |
|
B. |
Specify the bandwidth used for audio and video calls. |
|
C. |
Implement call admission control in a centralized call processing deployment. |
|
D. |
Provide alternate call routing when the primary call path is unavailable |
Answer: C
QUESTION 39 (Topic 2)
What is the relationship between a Region and a Location?
|
A. |
The Region codec parameter is used between a Region and its configured Locations. |
|
B. |
The Region setting for a Location sets the number of audio and video calls that Location can support. |
|
C. |
The codec parameter configured in the Region is only used between Regions and Location bandwidth is only used between Locations. |
|
D. |
The Region codec parameter is combined with Location bandwidth when communicating with other Regions. |
Answer: C
QUESTION 40 (Topic 2)
Which three steps need to be performed on a third party SIP phone device when adding it to Cisco Unified Communications Manager 6.0? (Choose three.)
|
A. |
Select XML as the method to send the third party SIP phone its configuration file. |
|
B. |
Add the MAC address of the Cisco Unified Communications Manager server to the SIP phone configuration. |
|
C. |
Set the directory numbers to match the directory numbers configured in Cisco Unified Communications Manager. |
|
D. |
Set the digest user ID in the SIP device to match the digest user ID in Cisco Unified Communications Manager. |
|
E. |
Set the TLS user ID and password in the SIP phone to match the TLS user ID and password in Cisco Unified Communications Manager. |
|
F. |
Set the proxy address in the SIP phone to match the IP address or fully qualified domain name of Cisco Unified Communications Manager. |
Answer: CDF
Explanation:Third party SIP In the proxy address field ofthe third-party phone, specify the IP address or fully qualified domain name ofCisco Unified Communications Manager. The User Name has to be set to the director} number that is assigned to the IP phone in Cisco Unified Communications Manager. The Authorization username lias to match the Digest User that was assigned to the phone.
Free VCE & PDF File for Cisco 642-447 Real Exam
Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …