Administering Windows Server 2012
Question No: 11 – (Topic 1)
Your network contains a server named Server1 that has the Network Policy and Access Services server role installed.
All of the network access servers forward connection requests to Server1. You create a new network policy on Server1.
You need to ensure that the new policy applies only to connection requests from the 192.168.0.0/24 subnet.
What should you do?
Set the Client IP4 Address condition to 192.168.0.0/24.
Set the Client IP4 Address condition to 192.168.0.
Set the Called Station ID constraint to 192.168.0.0/24.
Set the Called Station ID constraint to 192.168.0.
Answer: B Explanation:
RADIUS client properties
Following are the RADIUS client conditions that you can configure in network policy.
-> Calling Station ID: Specifies the network access server telephone number that was dialed by the dial-up access client.
-> Client Friendly Name: Specifies the name of the RADIUS client that forwarded the connection request to the NPS server.
-> Client IPv4 Address: Specifies the Internet Protocol (IP) version 4 address of the RADIUS client that forwarded the connection request to the NPS server.
-> Client IPv6 Address: Specifies the Internet Protocol (IP) version 6 address of the RADIUS client that forwarded the connection request to the NPS server.
-> Client Vendor: Specifies the name of the vendor or manufacturer of the RADIUS client that sends connection requests to the NPS server.
-> MS RAS Vendor: Specifies the vendor identification number of the network access server that is requesting authentication.
Question No: 12 HOTSPOT – (Topic 1)
Your network contains an Active Directory domain named contoso.com.
You have several Windows PowerShell scripts that execute when client computers start.
When a client computer starts, you discover that it takes a long time before users are prompted to log on.
You need to reduce the amount of time it takes for the client computers to start. The solution must not prevent scripts from completing successfully.
Which setting should you configure? To answer, select the appropriate setting in the answer area.
Lets the system run startup scripts simultaneously rather than waiting for each to finish http: //technet. microsoft. com/en-us/library/cc939423. aspx
Directs the system to wait for logon scripts to finish running before it starts the Windows Explorer interface program and creates the desktop.
If you enable this policy, Windows Explorer does not start until the logon scripts have finished running. This setting assures that logon script processing is complete before the user starts working, but it can delay the appearance of the desktop.
If you disable this policy or do not configure it, the logon scripts and Windows Explorer are not synchronized and can run simultaneously.
This policy appears in the Computer Configuration and User Configuration folders. The policy set in Computer Configuration takes precedence over the policy set in User Configuration.
By default, the Fast Logon Optimization feature is set for both domain and workgroup members. This setting causes policy to be applied asynchronously when the computer starts and the user logs on. The result is similar to a background refresh. The advantage is that it can reduce the amount of time it takes for the logon dialog box to appear and the amount of time it takes for the desktop to become available to the user. Of course, it also means that the user may log on and start working before the absolute latest policy settings have been applied to the system.
Depending on your environment, you may want to disable Fast Logon Optimization. You can do this with Group Policy, using the Always wait for the network at computer startup
and logon policy setting.
http: //technet. microsoft. com/en-us/magazine/gg486839. aspx http: //technet. microsoft. com/en-us/magazine/gg486839. aspx http: //technet. microsoft. com/en-us/library/cc958585. aspx
Question No: 13 – (Topic 1)
Your network contains an Active Directory forest named contoso.com.
The domain contains three servers. The servers are configured as shown in the following table.
You need to identify which server role must be deployed to the network to support the planned implementation.
Which role should you identify?
Network Policy and Access Services
Volume Activation Services
Windows Deployment Services
Active Directory Rights Management Services
Answer: C Explanation:
Windows Deployment Services (WDS) is a server role that enables you to remotely deploy Windows operating systems. You can use it to set up new computers by using a network- based installation. This means that you do not have to install each operating system directly from a CD, USB drive or DVD. To use Windows Deployment Services, you should have a working knowledge of common desktop deployment technologies and networking components, including Dynamic Host Configuration Protocol (DHCP), Domain Name System (DNS), and Active Directory Domain Services (AD DS). It is also helpful to understand the Preboot execution Environment (also known as Pre-Execution Environment).
Question No: 14 – (Topic 1)
Your network contains an Active Directory domain named adatum.com. A network administrator creates a Group Policy central store.
After the central store is created, you discover that when you create new Group Policy objects (GPOs), the GPOs do not contain any Administrative Templates.
You need to ensure that the Administrative Templates appear in new GPOs. What should you do?
Add your user account to the Group Policy Creator Owners group.
Configure all domain controllers as global catalog servers.
Copy files from %Windir%\Policydefinitions to the central store.
Modify the Delegation settings of the new GPOs.
Answer: C Explanation:
To take advantage of the benefits of .admx files, you must create a Central Store in the SYSVOL folder on a domain controller. The Central Store is a file location that is checked by the Group Policy tools. The Group Policy tools use any .admx files that are in the Central Store. The files that are in the Central Store are later replicated to all domain controllers in the domain.
Question No: 15 DRAG DROP – (Topic 1)
You have a WIM file that contains an image of Windows Server 2012 R2. applied a Microsoft Standalone Update Package (MSU) to the image.
You need to remove the MSU package from the image.
Which three actions should you perform in sequence? To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.
At a command prompt, specify the package identity to remove it from the image. You can remove multiple packages on one command line.
DISM /Image: C:\test\offline /Remove-Package /PackageName: Microsoft.Windows.Calc. Demo~6595b6144ccf1df~x86~en~22.214.171.124 /PackageName: Micro
Performs cleanup or recovery operations on the image.
Question No: 16 – (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains more than 100 Group Policy objects (GPOs). Currently, there are no enforced GPOs.
The domain contains a top-level organizational unit (OU) for each department. A group named Group1 contains members from each department.
You have a GPO named GPO1 that is linked to the domain. You need to configure GPO1 to apply settings to Group1 only. What should you use?
Answer: J Explanation:
Set-GPPermission grants a level of permissions to a security principal (user, security group, or computer) for one GPO or all the GPOs in a domain. You use the TargetName and TargetType parameters to specify a user, security group, or computer for which to set the permission level.
Specifies that the existing permission level for the group or user is removed before the new permission level is set. If a security principal is already granted a permission level that is higher than the specified permission level and you do not use the Replace parameter, no change is made.
Reference: http: //technet. microsoft. com/en-us/library/ee461038. aspx
Question No: 17 – (Topic 1)
You have Windows Server 2012 R2 installation media that contains a file named Install.wim. You need to identify the permissions of the mounted images in Install.wim.
What should you do?
Run dism.exe and specify the /get-mountedwiminfo parameter.
Run imagex.exe and specify the /verify parameter.
Run imagex.exe and specify the /ref parameter.
Run dism.exe and specify the/get-imageinfo parameter.
Answer: A Explanation:
/Get-MountedWimInfo Lists the images that are currently mounted and information about
the mounted image such as read/write permissions, mount location, mounted file path, and mounted image index.
http: //technet. microsoft. com/en-us/library/cc749447(v=ws. 10). aspx http: //technet. microsoft. com/en-us/library/dd744382(v=ws. 10). aspx http: //technet. microsoft. com/en-us/library/hh825224. aspx
Question No: 18 – (Topic 1)
Your network contains an Active Directory domain named contoso.com. All client computers run Windows 8.1.
The network contains a shared folder named FinancialData that contains five files.
You need to ensure that the FinancialData folder and its contents are copied to all of the client computers.
Which two Group Policy preferences should you configure? (Each correct answer presents part of the solution. Choose two.)
Answer: D,E Explanation:
Folder preference items allow you to create, update, replace, and delete folders and their contents. (To configure individual files rather than folders, see Files Extension.) Before you create a Folder preference item, you should review the behavior of each type of action possible with this extension.
File preference items allow you to copy, modify the attributes of, replace, and delete files. (To configure folders rather than individual files, see Folders Extension.) Before you create a File preference item, you should review the behavior of each type of action possible with
Question No: 19 – (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2008 R2.
You plan to test Windows Server 2012 R2 by using native-boot virtual hard disks (VHDs). You attach a new VHD to Server1.
You need to install Windows Server 2012 R2 in the VHD. What should you do?
Run imagex.exe and specify the /append parameter.
Run dism.exe and specify the /apply-image parameter.
Run imagex.exe and specify the /export parameter.
Run dism.exe and specify the /append-image parameter.
Answer: B Explanation:
On the destination computer, you will create a structure for the partitions where you apply your images. The partition structure on the destination computer must match the partition structure of the reference computer. If you apply an image to a volume with an existing Windows installation, files from the previous installation may not be deleted. Format the volume by using a tool such as DiskPart before applying the new image.
Question No: 20 – (Topic 1)
Your network contains an Active Directory domain named contoso.com. The Active Directory Recycle bin is enabled for contoso.com.
A support technician accidentally deletes a user account named User1. You need to restore the User1 account.
Which tool should you use?
Active Directory Administrative Center
100% Ensurepass Free Download!
–Download Free Demo:70-411 Demo PDF
100% Ensurepass Free Guaranteed!
–Download 2018 EnsurePass 70-411 Full Exam PDF and VCE
EnsurePass ExamCollection Testking Lowest Price Guarantee Yes No No Up-to-Dated Yes No No Real Questions Yes No No Explanation Yes No No PDF VCE Yes No No Free VCE Simulator Yes No No Instant Download Yes No No