[Free] 2018(Mar) EnsurePass Dumpsleader Microsoft 70-247 Dumps with VCE and PDF 81-90

Ensurepass.com : Ensure you pass the IT Exams
2018 Mar Microsoft Official New Released 70-247
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/70-247.html

Configuring and Deploying a Private Cloud with System Center 2012

Question No: 81 – (Topic 9)

You have a System Center 2012 Virtual Machine Manager (VMM) infrastructure that contains a virtualization host named Server2. Server2 runs Windows Server 2008 R2 Service Pack 1 (SP1). Server2 has the Hyper-V server role installed. You plan to deploy a service named Service1 to Server2. Service1 has multiple load-balanced tiers.

You need to recommend a technology that must be implemented on Server2 before you deploy Service1.

What should you recommend?

  1. TCP offloading

  2. the Network Policy and Access Services (NPAS) server role

  3. the Multipath I/O (MPIO) feature

  4. MAC address spoofing

Answer: D

Explanation:

http://technet.microsoft.com/en-us/library/hh335098.aspx If you want to deploy the service to a Windows Server 2008 R2-based Hyper-V host (with or without Service Pack 1), you must also enable MAC address spoofing for NLB to work correctly. If you do not, service deployment will fail. However, you cannot use the Enable spoofing of MAC addresses check box in the virtual machine template or the associated hardware profile to configure this setting. Instead, you must use the VMM command shell to configure this setting after you create the template, or in the hardware profile that you use for the template.

Question No: 82 DRAG DROP – (Topic 9)

You are the virtualization administrator for an organization, You manage a virtual machine (VM) by using System Center 2012 R2 Virtual Machine Manager. The VM is in a running state.

You plan to use the System Preparation (Sysprep) tool to create a virtual machine template from the VM.

You need to save a copy of the VM before you run the Sysprep tool.

Which actions should you take? To answer, drag the appropriate actions to the correct locations in the answer area. Each action may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Question No: 83 – (Topic 9)

Your network contains an Active Directory domain named contoso.com. You plan to install System Center 2012 Virtual Machine Manager (VMM) on server named Server1. During the installation, you receive the error message shown in the exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

You need to install VMM 2012 on Server1.

What should you instruct a domain administrator to do first?

  1. Create a service location (SRV) record named _tcp.server1.dkm.contoso.com and a host (A) record named DKM.

  2. Create a service connection point (SCP) object named DKM.TCP.contoso.com, and

    then modify the permissions of the SCP object.

  3. Create a container named DKM, and then modify the permissions of the container.

  4. Create a security group named DKM, and then modify the permissions of the group.

Answer: C Explanation:

http://blogs.technet.com/b/scvmm/archive/2012/06/18/kb-system-center-2012-virtual- machine- manager- setup-fails-to-create-child-objects-for-dkm.aspx http://www.aidanfinn.com/?p=11446

Question No: 84 – (Topic 9)

A company uses Windows Server 2012 R2 servers that have the Hyper-V role installed. The company uses a single System Center 2012 R2 Data Protection Manager (DPM) server to back up and recover the Hyper-V environment.

You deploy a new standalone Hyper-V host server, and then deploy 20 new virtual machines (VMs) to the host server.

You create a DPM protection group named ProtectionGroup3. You need to automate the process of adding the 20 new VMs to ProtectionGroup3.

What should you run?

  1. the Windows PowerShell cmdlet Register-SCVMMManagedComputer

  2. the Windows PowerShell cmdlet Update-SCVMMManagedComputer

  3. the Windows PowerShell script AddNewStandAloneVM.ps1, and specify the Hyper-V server and ProtectionGroup3 as parameters

  4. the Windows PowerShell script AddNewStandAloneVMToDRServer.ps1, and specify the Hyper-V server and ProtectionGroup3 as parameters

Answer: C Explanation:

http://technet.microsoft.com/en-us/library/jj721498.aspx

Question No: 85 – (Topic 9)

Contoso, Ltd. has a Windows Server 2012 R2 server with the Hyper-V role installed. Contoso has a virtual machine named CVM1. The company uses System Center 2012 R2 Virtual Machine Manager (VMM) to manage the environment.

Contoso acquires Fabrikam, Inc. Fabrikam has a Windows Server 2012 R2 server with the Hyper-v role installed.

CVM1 must be able to communicate with a virtual machine named FVM2 on a non-routable subnet in the Fabrikam Hyper-V environment

You need to ensure that CVM1 can communicate with FVM2. Which technology should you implement?

  1. Remote Desktop (RD) Gateway

  2. Windows Network Load Balancing (WNLB)

  3. Windows Server Gateway

  4. Reverse Proxy Server

Answer: C Explanation:

http://technet.microsoft.com/en-us/library/dn313101.aspx

Question No: 86 – (Topic 9)

Your network contains a System Center 2012 Virtual Machine Manager (VMM) infrastructure. The infrastructure contains 50 Hyper-V hosts.

You plan to deploy Power Optimization for VMM.

You need to prepare the infrastructure for the planned deployment.

What should you do? (Each correct answer presents part of the solution. Choose two.)

  1. Install a Baseboard Management Controller (BMC) on each Hyper-V host.

  2. Enable Dynamic Optimization.

  3. Enable Hibernation.

  4. Enable Performance and Resource Optimization (PRO).

  5. Install a configuration provider on each Hyper-V host.

Answer: A,B Explanation:

A: To use Power Optimization, the host computers must have a BMC that enables out-of- band management.

B: Power Optimization is an optional feature of Dynamic Optimization, and it is only available when a host group is configured to migrate virtual machines through Dynamic Optimization.

http://technet.microsoft.com/en-us/library/gg675109.aspx

Question No: 87 HOTSPOT – (Topic 9)

You use System Center 2012 R2 Virtual Machine Manager (VMM) to manage the virtualization infrastructure. You deploy a service named Service1. Service1 has two tiers. Each tier contains one upgrade domain and multiple virtual machines. You plan to update Service1.

You need to identify which changes can be applied to Service 1 without requiring downtime and which updates require downtime.

What should you identify? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Question No: 88 – (Topic 9)

Your company has a private cloud managed by a System Center 2012 Virtual Machine Manager (VMM) infrastructure.

The server fabric contains three servers named Host1, Host2, and Host3. The servers are configured as shown on the following table.

Ensurepass 2018 PDF and VCE

The networking fabric contains a SAN named STORAGE1. STORAGE1 supports cloning. You create a SAN copy-capable template named Template1 for a new virtual machine.

Template1 uses a VHD stored on Host2.

You need to ensure that Template1 can be used to provision virtual machines on Host1 and Host3. The solution must use the minimum amount of administrative effort and must use SAN cloning.

What should you do? (Each correct answer presents part of the solution. Choose two.)

  1. Move Template1 to Host1.

  2. Move Template1 to Host3.

  3. Add Host1 to HG2.

  4. Configure Host2 to use Fibre Channel connection.

  5. Configure Host3 to use an iSCSI connection.

  6. Add Host3 to HG1.

Answer: A,F Explanation:

Put the template on the Library server (host 1).

Add the second host (host3) to the Host group on the library server (host1).

Reference: Rapid Provisioning of Virtual Machines Using SAN Copy Overview URL: http://technet.microsoft.com/en-us/library/gg610594.aspx

Question No: 89 – (Topic 9)

An organization uses System Center 2012 R2 Data Protection Manager (DPM). Backups of virtual machines that are hosted on local volumes complete successfully. Backups of virtual machines that are hosted on storage area network (SAN) volumes fail. You receive the following error message in the Windows Event Log:

Backup failed with the following error An error occurred: Writer #39;Microsoft Hyper-V VSS Writer#39; reported an error: #39;VSS_WS_FAILED_AT_FREEZE#39;.

Check the application component to verify it is in a valid state for the operation. You need to ensure that all backups can complete successfully.

What should you do?

  1. On the Cluster Shared Volume (CSV), grant administrator rights to the DPM server computer account.

  2. On all Windows servers in the environment, enable the Volume Shadow Copy Service (VSS).

  3. Install and configure the Volume Shadow Copy Service (VSS) hardware provider from

    the SAN vendor.

  4. On virtual machine files hosted on the Cluster Shared Volume (CSV), grant

Answer: C Explanation:

http://technet.microsoft.com/en-us/library/hh758184.aspx

Question No: 90 – (Topic 9)

You have a deployment of System Center 2012 R2 Virtual Machine Manager (VMM).

You plan to use the Create Clustered File Server Wizard to create a cluster on two physical servers named Server1 and Server2. The new cluster will be named Cluster1 and will have a virtual IP (VIP) of 10.20.30.13.

When you attempt to deploy the new cluster, you receive the following error message in the job window: quot;Error (26568) The IP address 10.20.30.13 could not be allocated from any IP address pool.quot;

You need to ensure that you can deploy the cluster. What should you do?

  1. Create a new logical network IP pool and add the IP address to the new pool.

  2. Create a new VIP template profile.

  3. Add the IP address to the VIP section of the logical network IP pool.

  4. Create a DHCP reservation for the IP address.

Answer: A

100% Ensurepass Free Download!
Download Free Demo:70-247 Demo PDF
100% Ensurepass Free Guaranteed!
Download 2018 EnsurePass 70-247 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

You must be logged in to post a comment.

Proudly powered by WordPress   Premium Style Theme by www.gopiplus.com