[Free] 2017(Oct) EnsurePass Pass4sure Cisco 648-238 Dumps with VCE and PDF 11-20

EnsurePass
2017 Oct Cisco Official New Released 648-238
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/648-238.html

Implementing Cisco Connected Physical Security 1 Exam (CCPS1)

Question No: 11

Which of the following must be considered when calculating storage and retention on a Cisco Physical Security MSP server?

  1. Number of cameras, frame rates, camera distances, and record on motion requirements

  2. Number of cameras, frame rates, and server locations

  3. Number of cameras, frame rates, compression types, and record on motion requirements

  4. Number of cameras, camera distances, server locations, and compression types

Answer: C

Question No: 12

What is the approximate total usable drive capacity for a CPS-MSP-1RU-K9 populated with 4 x 1 TB HDDs?

  1. 1 TB

  2. 2 TB

  3. 3 TB

  4. 4 TB

Answer: C

Question No: 13

Order the servers from lowest to highest usable capacity.

A. 2RU (6 x 1 TB), 2RU (12 x 1 TB), 2RU (6 x 2 TB), 2RU (12 x 2 TB)

B. 2RU (6 x 1 TB), 2RU (6 x 2 TB), 2RU (12 x 1 TB), 2RU (12 x 2 TB)

C. 2RU (12 x 2 TB), 2RU (12 x 1 TB), 2RU (6 x 2 TB), 2RU (6 x 1 TB)

D. 2RU (12 x 2 TB), 2RU (6 x 2 TB), 2RU (12 x 1 TB), 2RU (6 x 1 TB)

Answer: B

Question No: 14

How can video storage requirements be calculated?

  1. Camera count x bit rate x days recording

  2. Bit rate x frames per second x days recording

  3. Frames per second x codec x camera count

  4. Camera count x bit rate x hard drive capacity

Answer: A

Question No: 15

By default, which two passwords are NOT configured in Cisco Video Surveillance Manager 6.3.2? (Choose two.)

  1. VSMC password

  2. VSOM root user password

  3. Operator root user password

  4. Linux root user password

  5. MySQL root password

Answer: C,E

Question No: 16

Which network service should be enabled and configured to ensure an accurate and consistent time source for all video surveillance devices in the network?

  1. CDP

  2. DHCP

  3. NTP

  4. TCP/IP

Answer: C

Question No: 17

In VSM 6.3.2, should the default password be changed to a new password?

  1. No, never change the default passwords

  2. Change the password for VSOM, but not the password for the operating system

  3. Yes, change the passwords for VSOM and the operating system

  4. The default passwords cannot be changed

Answer: C

Question No: 18

When an installation of VSM is complete, what is the Cisco recommendation and best practice for the final step that should be taken?

  1. Create a configuration backup on the same server

  2. Create a backup in a location other than the server

  3. Delete any batch administration files left over from the installation

  4. Stop and restart each archive

Answer: B

Question No: 19

Upon power on, the CPS-MSP-2RU-K9 server starts beeping and continues to do so, even if the server seems to be operational. What is the probable cause of this issue?

  1. The clock battery in the server is empty and needs to be replaced

  2. One of the fans in the power supply has failed

  3. The incoming power voltage into the power supply is too low or too high

  4. One of the hard disk drives has failed and needs to be replaced

Answer: D

Question No: 20

On a VSMS server, what is YaST used for?

  1. To check the status of the RAID storage

  2. To configure the network settings

  3. To monitor the network performance

  4. To troubleshoot video stream errors

Answer: B

100% Free Download!
Download Free Demo:648-238 Demo PDF
100% Pass Guaranteed!
Download 2017 EnsurePass 648-238 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 EnsurePass IT Certification PDF and VCE

You must be logged in to post a comment.

Proudly powered by WordPress   Premium Style Theme by www.gopiplus.com