[Free] 2017(Oct) EnsurePass Testking Cisco 642-889 Dumps with VCE and PDF 61-70

EnsurePass
2017 Oct Cisco Official New Released 642-889
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/642-889.html

Implementing Cisco Service Provider Next-Generation Egde Network Services

Question No: 61

In MPLS Layer 3 VPN implementations, which mechanism is used to control which routes are imported to a VRF?

  1. RT

  2. RD

  3. VC ID

  4. PW ID

  5. VRF ID

Answer: A Explanation:

http://blog.initialdraft.com/archives/1537/

Question No: 62

Refer to the partial Cisco IOS XR PE router VRF configuration exhibit.

Ensurepass 2017 PDF and VCE

To implement a central-service VPN supporting both customer1 and customer2, what will be the required corresponding VRF configuration on the central-service-server PE router?

  1. vrf central-service-server address-family ipv4 unicast import route-target

    3:1

    2:2

    export route-target 3:1

    2:1

    !

  2. vrf central-service-server address-family ipv4 unicast import route-target

    3:1

    2:1

    export route-target 3:1

    2:2

    !

  3. vrf central-service-server address-family ipv4 unicast import route-target

    3:1

    1:1

    1:2

    export route-target 3:1

    1:1

    1:2

    !

  4. vrf central-service-server address-family ipv4 unicast import route-target

3:1

1:1

1:2

2:1

2:2

export route-target 3:1

1:1

1:2

2:1

2:2

!

Answer: A

Question No: 63

Which two Layer 2 VPN methods support interworking between customer sites with different Layer 2 encapsulation at each end (for example, Frame Relay to Ethernet interworking)? (Choose two.)

  1. AToM

  2. VPLS

  3. GET VPN

  4. L2TPv3

Answer: A,D Explanation:

http://www.cisco.com/en/US/docs/ios/12_3t/12_3t2/feature/guide/gtl2tpv3.html#wp1040784

The Layer 2 Tunnel Protocol Version 3 feature expands on Cisco support of the Layer 2 Tunnel Protocol Version 3 (L2TPv3). L2TPv3 is an Internet Engineering Task Force (IETF) l2tpext working group draft that provides several enhancements to L2TP for the capability to tunnel any Layer 2 payload over L2TP.

Specifically, L2TPv3 defines the L2TP protocol for tunneling Layer 2 payloads over an IP core network using Layer 2 virtual private networks (VPNs). Benefits of this feature include the following:

鈥2TPv3 simplifies deployment of VPNs

鈥2TPv3 does not require Multiprotocol Label Switching

鈥2TPv3 supports Layer 2 tunneling over IP for any payload http://www.cisco.com/en/US/products/ps6646/products_ios_protocol_option_home.html Cisco Any Transport over MPLS (AToM) is a solution for transporting Layer 2 packets over an MPLS backbone. It enables Service Providers to supply connectivity between customer sites with existing data link layer (Layer 2) networks via a single, integrated, packet-based network infrastructure: a Cisco MPLS network. Without separate networks that each have network management environments, Service Providers can deliver Layer 2 connections over an MPLS backbone.

Cisco AToM provides a common framework to encapsulate and transport supported Layer 2 traffic types over an MPLS network core. Service Providers can use a single MPLS network infrastructure to offer connectivity for supported Layer 2 traffic and for IP traffic in Layer 3 VPNs.

Question No: 64

Which flavor of MPLS Layer 3 VPN has MPLS enabled on PE-CE links?

  1. basic

  2. CSC

  3. inter-AS

  4. AToM

  5. VPLS

Answer: B

Explanation:

http://www.cisco.com/en/US/docs/ios/12_0st/12_0st14/feature/guide/csc.html

Ensurepass 2017 PDF and VCE

Question No: 65

Which two statements about implementing a separate MPLS VPN to provide customers Internet access are correct? (Choose two.)

  1. The Internet gateway router will act as a CE router.

  2. Customers will use separate interfaces for VPN and Internet access.

  3. Customers are assigned to the Internet VPN.

  4. Internet routes will be leaked from the PE global routing table to the customer VRF.

Answer: A,C

Question No: 66

A PE configured with VRF ABC needs to export only subnet 1.1.1.1/32 with RT 100:100 without losing its original RT 200:200 to a remote PE. Which configuration is correct?

Ensurepass 2017 PDF and VCE

A)

Ensurepass 2017 PDF and VCE

B)

Ensurepass 2017 PDF and VCE

C)

Ensurepass 2017 PDF and VCE

D)

  1. Exhibit A

  2. Exhibit B

  3. Exhibit C

  4. Exhibit D

Answer: C

Question No: 67

When implementing EoMPLS on Cisco IOS XR routers, which command under the l2vpn configuration mode is used to define the pseudowire?

  1. pbb

  2. xconnect

  3. connect

  4. bridge

  5. bridge-domain

Answer: B Explanation:

http://www.cisco.com/en/US/docs/wireless/asr_901/Configuration/Guide/eompls.html

Ensurepass 2017 PDF and VCE

Question No: 68

When configuring an EoMPLS PW on a Cisco IOS XR router, what are the two supported transport modes? (Choose two.)

  1. ethernet (Ethernet port mode)

  2. ip (routed mode)

  3. vlan (VLAN-tagged mode)

  4. transparent (bridged mode)

Answer: A,C Explanation:

http://www.cisco.com/en/US/docs/ios_xr_sw/iosxr_r3.8/mpls/configuration/guide/gc38v2.ht ml#wp1072883

鈥thernet Port Mode

鈥thernet Remote Port Shutdown

鈥LAN Mode

鈥nter-AS Mode

鈥inQ Mode

鈥inAny Mode

鈥ac-in-Mac Protocol (Provide Backbone Bridging)

Ensurepass 2017 PDF and VCE

Ensurepass 2017 PDF and VCE

Question No: 69

Refer to the partial Cisco IOS XR PE router configuration exhibit for supporting a Layer 3 MPLS VPN customer using BGP as the CE-to-PE routing protocol.

Ensurepass 2017 PDF and VCE

The service provider AS number is 64500, the customer AS number is 64501, and the customer CE router is 10.1.1.1. What is missing in the configuration?

  1. The route distinguisher has not been configured under router bgp 64500 vrf Customer_A.

  2. The import and export route targets have not been configured under router bgp 64500 vrf Customer_A.

  3. The 10.1.1.1 BGP neighbor has not been activated for IPv4 unicast routing.

  4. The 10.1.1.1 BGP neighbor has not been activated for the VPNv4 address family.

Answer: A Explanation:

http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/srbgprid.html

Route Distinguisher

A router distinguisher (RD) creates routing and forwarding tables and specifies the default route distinguisher for a VPN. The RD is added to the beginning of an IPv4 prefix to change it into a globally unique VPN-IPv4 prefix. An RD can be composed in one of two ways: with an autonomous system number and an arbitrary number or with an IP address and an

arbitrary number. You can enter an RD in either of these formats:

鈥nter a 16-bit autonomous system number, a colon, and a 32-bit number. For example: 45000:3

鈥nter a 32-bit IP address, a colon, and a 16-bit number. For example: 192.168.10.15:1

Ensurepass 2017 PDF and VCE

Question No: 70

What is an advantage of using the Cisco EVC infrastructure to implement carrier-class Ethernet services that are not available on non-EVC-capable platforms?

  1. PW redundancy

  2. interworking support

  3. PW stitching support

  4. flexible frame-matching support and VLAN tag manipulation

  5. local cross-connect support

Answer: D Explanation:

http://www.cisco.com/web/YU/events/expo_08/pdfs/Carrier_Ethernet_Marek_Moskal.pdf

Ensurepass 2017 PDF and VCE

100% Free Download!
Download Free Demo:642-889 Demo PDF
100% Pass Guaranteed!
Download 2017 EnsurePass 642-889 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 EnsurePass IT Certification PDF and VCE

You must be logged in to post a comment.

Proudly powered by WordPress   Premium Style Theme by www.gopiplus.com