[Free] 2017(Oct) EnsurePass Dumpsleader Cisco 642-732 Dumps with VCE and PDF 81-90

EnsurePass
2017 Oct Cisco Official New Released 642-732
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/642-732.html

Conducting Cisco Unified Wireless Site Survey V2

Question No: 81

What is the attenuation of a wireless signal that passes through a cider block wall?

  1. 3 dB

  2. 4 dB

  3. 6 dB

  4. 12 dB

Answer: B

Question No: 82

When using WCS 7.0 to calibrate a floor in a facility, which two factors are common to the point and linear calibration methods? (Choose two.)

  1. You must go through each collection point at a speed that isn#39;t too fast to collect too much information nor too slow which limits the amount of information collected.

  2. You must sample both the 802.11a/n and the 802.11b/g/n network separately.

  3. If one collection point in the linear or point collection method is missed, you have to start at the beginning again.

  4. Rotating the client is only required during the point collection process because the linear method is a slowly moving process.

  5. You will only need to combine the linear and point collection methods in special spaces like hallways.

Answer: A,B

Question No: 83

Refer to the exhibit. A company requires a multi-point bridge solution with Cisco 1400 series bridges. The central bridge (B1) is set to 10 dBm, the manufacturing remote bridge (B2) is set to 20 dBm, the inventory remote bridge (B3) is set to 20 dBm, and the shop remote bridge (B4) is set to 10 dBm. What is the maximum allowed power setting for all four bridges?

Ensurepass 2017 PDF and VCE

  1. B1=12dBmB2=12dBmB3=12dBmB4=12dBm

  2. B1=12dBmB2=24dBmB3=24dBmB4=24dBm

  3. B1=24dBmB2=12dBmB3=12dBmB4=12dBm

  4. B1=24dBmB2=24dBmB3=24dBmB4=24dBm

  5. B1=20dBmB2=20dBmB3=20dBmB4=20dBm

  6. B1=10dBmB2=24dBmB3=24dBmB4=24dBm

Answer: B

Question No: 84

Which term defines the effects on RF known as free space path loss?

  1. Scattering

  2. Absorption

  3. Diffusion

  4. Diffraction

  5. Reflection

Answer: C

Question No: 85

A company has requested an indoor wireless survey in a multi-tenant building for 2.4GHz data and 5GHz voice services. Data clients will require three spatial streams and 4×4 MIMO technology. What is the Cisco recommended Access Point for performing this survey?

A. 600

B. 1600

C. 2600

D. 3600

Answer: D

Question No: 86

Which three are logistical issues that need to be taken into consideration prior to

performing a site survey? (Choose three.)

  1. What level of client density and throughput is expected for each WLAN cell?

  2. Will security clearances be required to perform the site survey?

  3. How much time will be required to survey each potential AP location?

  4. Will contractor badges and employee or union escorts be required while performing the site survey?

  5. Is access available to customer employees so initial interviews can be performed?

  6. Will any facility orientation be required prior to performing the site survey?

Answer: B,D,F

Question No: 87

The customer had a 802.11b/g WLAN site survey and installation two years ago with the final service performing as expected. Since that time, the customer has experienced modest customer growth while maintaining employee headcount. New wireless applications are being evaluated along with a possible temporary headcount increase, but the current WLAN performance has noticeable performance degradation. What is the most likely cause of the WLAN performance problems?

  1. They have added a second microwave to the break room.

  2. A new coffee shop with a wireless hotspot has opened across the street.

  3. The customer has expanded their shipping capacity by 50%.

  4. Employees are now using their smart phones and tablets in the office.

Answer: D

Question No: 88

An engineer is installing a wireless network in an industrial area with extreme temperatures and a significant amount of dust. Which enclosure should be used to protect the APs?

  1. NEMA

  2. ACU

  3. WLSE

  4. ADU

Answer: A

Question No: 89

What three pieces of information should be included in an installation report? (Choose three.)

  1. software versions of each AP

  2. configuration files for each WLC

  3. switch connection for each MAP

  4. license file for each RAP

  5. radio status for each AP

  6. mobility group name for each WLC

Answer: A,B,E

Question No: 90

When performing a site survey, what is a typical usable range for client signal strength?

  1. -70 to -90 dBm

  2. -60 to -80 dBm

  3. -45 to -65 dBm

  4. -30 to -50 dBm

Answer: B

100% Free Download!
Download Free Demo:642-732 Demo PDF
100% Pass Guaranteed!
Download 2017 EnsurePass 642-732 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 EnsurePass IT Certification PDF and VCE

You must be logged in to post a comment.

Proudly powered by WordPress   Premium Style Theme by www.gopiplus.com