[Free] 2017(Oct) EnsurePass Dumpsleader Cisco 642-035 Dumps with VCE and PDF 91-100

EnsurePass
2017 Oct Cisco Official New Released 642-035
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/642-035.html

Troubleshooting Cisco Unified Computing

Question No: 91

Which four tasks can be performed via Cisco IMC remote access to a Cisco UCS system? (Choose four.)

  1. power cycle the server

  2. deploy an operating system

  3. toggle the locator LED

  4. configure the boot order

  5. view properties and sensors

  6. configure the hypervisor

  7. enable Cisco UCS Manager

Answer: A,C,D,E

Question No: 92

Ensurepass 2017 PDF and VCE

Ensurepass 2017 PDF and VCE

Ensurepass 2017 PDF and VCE

Ensurepass 2017 PDF and VCE

Ensurepass 2017 PDF and VCE

Ensurepass 2017 PDF and VCE

Ensurepass 2017 PDF and VCE

Refer to Exhibit 2. Which of the following options is true about why this C-Series vHBA will not allow SAN boot?

  1. The WWPN and WWNN must match

  2. Persistent Binding is required by all operating systems

  3. The default VLAN must match the FCoE VLAN

  4. The Class of Service must be set to #39;1#39; to negotiate Priority Flow Control for FCoE traffic

Answer: A

Question No: 93

Which three statements explain why a Cisco UCS server cannot boot via SAN? (Choose three.)

  1. The correct VLAN must be configured.

  2. The correct WWPN must be specified in the service profile.

  3. The server must be able to ping the target.

  4. The correct boot order must be specified in the service profile.

  5. The boot LUN number must specify the appropriate operating system.

Answer: B,D,E

Question No: 94

Which statement is true about system event logs?

  1. By default, they require manual clearing.

  2. They report operating system crashes and errors.

  3. They are also referred to as system error logs.

  4. They can only be accessed from Cisco UCS Manager.

Answer: A

Question No: 95

Which option causes an operating system on a UCS device to consistently crash several

minutes after booting?

  1. faulty power supply

  2. out-of-date network adapter firmware

  3. incompatible operating system driver

  4. incorrect boot order

  5. disabled trusted platform module

Answer: C

Question No: 96

Which option describes how you can reset the BIOS password of a Cisco UCS C-Series Rack-Mount Server?

  1. Turn off the server. Press and hold the F7 key, and then turn on the server.

  2. Reset the jumper on the motherboard.

  3. Press and hold the power switch for 20 seconds.

  4. Turn off the server. Press and hold the F2 key, and then turn on the server.

Answer: B

Question No: 97

Using CLI/GUI to troubleshoot packet flow from server to the fabric, you discover that the blade server 1/7 in a Cisco UCS B-Series Blade Server is running slower than expected. You must troubleshoot the problem by using packet tracing. Which three commands can you use to identify the uplink from the Cisco UCS Fabric Interconnect to the external network of the server? (Choose three.)

  1. show pinning server-interfaces

  2. show pinning border-interface active

  3. show service-profile circuit server 1/7

  4. show fex detail

  5. show pinning border-interface

  6. show interface-fex fabric

Answer: A,B,C

Question No: 98

A customer is troubleshooting the CIMC and resets the CIMC. Which three settings are defaults for the CIMC after it is reset? (Choose three.)

  1. SSH and Telnet are disabled from accessing the CIMC CLI.

  2. HTTPS enabled for accessing the CIMC GUI.

  3. A user account named admin exists that has a password of password.

  4. DHCP is disabled on the management port.

  5. The boot order is EFI, CDROM, PXE (using LoM), FDD, and HDD.

  6. KVM and vMedia are disabled.

  7. USB is disabled.

Answer: B,C,E

Question No: 99

Which statement about when the FSM on a blade is set to FsmComputeBladeDiscoverCimcInventory is true?

  1. The Object is a ComputeBlade, the Workflow being performed is Discover, and the current Operation is CimcInventory on the managingInst node.

  2. The Object is a Compute, the Workflow being performed is BladeDiscover, and the current Operation is CimcInventory on the managementInst node.

  3. The Object is a ComputeBlade, the Workflow being performed is Discover, and the current Operation is CimcInventory on the master node.

  4. The Object is a Compute, the Workflow being performed is BladeDiscover, and the current Operation is CimcInventory on the master node.

Answer: A

Question No: 100

Refer to the exhibit. A server has a service profile that is configured to boot over iSCSI. During boot, this message is displayed. What is the cause of this message?

Ensurepass 2017 PDF and VCE

  1. The local disk is not present.

  2. RAID 0 is not configured on the local disk.

  3. The remote disk is powered off.

  4. The server has not configured the pWWN properly in the boot policy.

Answer: C

100% Free Download!
Download Free Demo:642-035 Demo PDF
100% Pass Guaranteed!
Download 2017 EnsurePass 642-035 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 EnsurePass IT Certification PDF and VCE

You must be logged in to post a comment.

Proudly powered by WordPress   Premium Style Theme by www.gopiplus.com