[Free] 2017(Oct) EnsurePass Dumpsleader Cisco 642-035 Dumps with VCE and PDF 71-80

EnsurePass
2017 Oct Cisco Official New Released 642-035
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/642-035.html

Troubleshooting Cisco Unified Computing

Question No: 71

While attempting to boot a Cisco UCS server from SAN, you are unable to see the LUN. Which of these are causing the problem? (Choose three.)

  1. VHBA template

  2. RAID policy

  3. zoning

  4. LUN ID

  5. vACLs

  6. disjoint fabrics

Answer: A,C,D

Question No: 72

You attempt to perform an ESXi update on a Cisco UCS C250 server, but the update does not recognize the NICs. You must perform the update as quickly as possible. Which step must you do first?

  1. Check the UCS compatibility matrix and replace the NIC with a supported one.

  2. Reconfigure the NIC ID on the LOM.

  3. Update the LOM firmware by using the Cisco Host Update Utility.

  4. Update the NIC firmware by using the Cisco Host Update Utility.

Answer: C

Question No: 73

How can you set a Cisco UCS C-Series Server to export tech-support data for TAC to an external file server?

  1. CIMC to a TFTP server

  2. CIMC to an RCP server

  3. FSM to a TFTP server

  4. FSM to an RCP server

Answer: A

Question No: 74

A customer is troubleshooting QoS in a Cisco UCS domain due to high packet drops in the network. The customer has configured the vNIC and associated QoS policy, and changed the MTU from 1000 to 1200. Packet drops still exist. What is the cause of this issue?

  1. The MTU specified here must be greater than the MTU specified in the associated QoS system class. If this MTU value is less than the MTU value in the QoS system class, packets may be dropped during data transmission.

  2. The MTU specified here must be equal to or less than the MTU specified in the associated QoS system class. If this MTU value exceeds the MTU value in the QoS system class, packets may be dropped during data transmission.

  3. The MTU specified here must be less than the MTU specified in the associated QoS system policy. If this MTU value exceeds the MTU value in the QoS system policy, packets may be not be dropped during data transmission.

  4. The MTU must be optimized and should be changed to fc with the CLI command set mtu fc.

Answer: B

Question No: 75

While updating firmware in a Cisco UCS environment, what will the Cisco UCS Manager do?

  1. show you all versions available on Cisco.com

  2. show you all versions downloaded to the Cisco UCS Manager

  3. show you only versions that are supported in your environment

  4. show you only versions that you selected to show

  5. show you old and new versions from your download

Answer: C

Question No: 76

You are attempting to install Microsoft Server 2008 R2 on a Fibre Channel LUN, but the installer does not see the LUN. You have used F6 to load the appropriate SCSI driver. What should your first troubleshooting step be?

  1. Email the SAN administrator to validate that your LUN is defined.

  2. Check the configuration of the vHBA in the service profile.

  3. Validate that the boot order is correct.

  4. Validate zoning on the Fibre Channel switch.

  5. Validate that the Fibre Channel uplink from the fabric interconnect is up.

Answer: B

Question No: 77

How long are the LED states saved after a blade is removed from a Cisco UCS chassis?

  1. 1 minute

  2. 5 minutes

  3. 10 minutes

  4. 30 minutes

  5. 60 minutes

Answer: C

Question No: 78 HOTSPOT

Ensurepass 2017 PDF and VCE

Ensurepass 2017 PDF and VCE

Ensurepass 2017 PDF and VCE

Ensurepass 2017 PDF and VCE

Ensurepass 2017 PDF and VCE

Ensurepass 2017 PDF and VCE

Ensurepass 2017 PDF and VCE

Answer:

Ensurepass 2017 PDF and VCE

Question No: 79

Refer to the exhibit.

Ensurepass 2017 PDF and VCE

Using RBAC for security in a Cisco UCS environment, what is seen in the exhibit?

  1. custom role

  2. default role

  3. LDAP group map

  4. external service profile

Answer: B

Question No: 80

What is the recommended procedure to update Cisco UCS C-Series rack-mount server firmware?

  1. Launch the Cisco UCS Firmware Update Utility from virtual media.

  2. Launch the Cisco UCS Host Update Utility from virtual media.

  3. Launch the Cisco UCS Server Update Utility from virtual media.

  4. Launch the Cisco UCS CIMC Update Utility from virtual media.

Answer: B

100% Free Download!
Download Free Demo:642-035 Demo PDF
100% Pass Guaranteed!
Download 2017 EnsurePass 642-035 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 EnsurePass IT Certification PDF and VCE

You must be logged in to post a comment.

Proudly powered by WordPress   Premium Style Theme by www.gopiplus.com