[Free] 2017(Oct) EnsurePass Dumpsleader Cisco 642-035 Dumps with VCE and PDF 1-10

2017 Oct Cisco Official New Released 642-035
100% Free Download! 100% Pass Guaranteed!

Troubleshooting Cisco Unified Computing

Question No: 1

Ensurepass 2017 PDF and VCE

Ensurepass 2017 PDF and VCE

Ensurepass 2017 PDF and VCE

Ensurepass 2017 PDF and VCE

What is the reason that no C-Series servers can access Fibre Channel storage from this Cisco Nexus 554SUP switch?

  1. Zoning mode mis-match with the MDS 9124

  2. There are no active Fibre Channel interfaces

  3. VSAN mis-match on Fibre Channel interfaces

  4. None of the virtual fibre channel interfaces are configured

Answer: C

Question No: 2

Which three send and receive locations an administrator can find the root cause for a network issue on the Cisco UCS domain? (Choose three.)

  1. between fabric interconnect and LAN or SAN

  2. between the FEX and fabric interconnect

  3. between each FEX on the Cisco UCS chassis

  4. between the host and FEX

  5. between fabric interconnects within the domain

  6. between the Cisco UCS chassis and system interconnects

Answer: A,B,D

Question No: 3

After a Cisco UCS Manager upgrade, you discover issues relating to the IQN of several service profiles. Which two options are possible causes of the problem? (Choose two.)

  1. duplicate service profiles

  2. a duplicate IQN within a service profile

  3. a duplicate IQN across multiple service profiles

  4. an unsuccessful upgrade

  5. incorrect VSAN settings

Answer: B,C

Question No: 4

You attempt to install the 64-bit version of Windows Server 2008 on a Cisco UCS C-Series Rack-Mount Server. The installation starts, but the operating system fails to recognize the hard drive or the RAID array. Which option is the cause of the problem?

  1. Windows Server 2008 is incompatible with Cisco UCS C-Series servers.

  2. The HDD firmware is too old and fails to be recognized by the operating system.

  3. LSI drivers are not bundled in the 64-bit version of Windows 2008.

  4. Microsoft operating systems are cannot be installed on RAID arrays.

Answer: C

Question No: 5

Refer to the exhibit.

Ensurepass 2017 PDF and VCE

Which of these is an extension of the virtual machine abstraction that is applied to physical servers?

  1. service profile

  2. compute profile

  3. organization profile

  4. locale profile

  5. role profile

Answer: A

Question No: 6

Which Cisco UCS C Series command sequence initiates the sending of a technical support file to a TFTP server?

  1. ucs /cimc # scope tech-support ucs /cimc/tech-support # set ip ucs /cimc/tech- support *# set tftp-path \showtechsupport ucs /cimc/tech-support *#commit ucs /cimc/tech- support *#start

  2. ucs /cimc # scope tech-support ucs /cimc/tech-support # set tftp-ip ucs

    /cimc/tech-support *# set path \showtechsupport ucs /cimc/tech-support *#commit ucs

    /cimc/tech-support *#start

  3. ucs /cimc # scope support ucs /cimc/support # set tftp-ip ucs /cimc/support *# set path \showtechsupport ucs /cimc/support *#commit ucs /cimc/support *#start

  4. ucs /cimc # scope system-support ucs /cimc/system-support # set tftp-ip ucs

/cimc/system-support *# set path \showtechsupport ucs /cimc/system-support *#commit ucs /cimc/system-support *#start

Answer: B

Question No: 7

Which four tech support files can you create with the Cisco UCS Manager that you can submit to Cisco TAC for support? (Choose four.)

  1. UCSM

  2. disk LUNs

  3. fabric extender

  4. memory

  5. rack server

  6. chassis

  7. server cache

Answer: A,C,E,F

Question No: 8

What is the correct procedure to change Ethernet switching modes?

  1. Navigate to the subordinate Fabric Interconnect in the GUI, choose quot;Set Ethernet Switching modequot;, wait for it to come back up, and repeat on the primary FI.

  2. Navigate to either Fabric Interconnect in the GUI, choose quot;Set Ethernet Switching modequot;, and wait while both FIs reboot simultaneously.

  3. Navigate to either Fabric Interconnect in the GUI and transparently update the mode to switching. Repeat on the other Fabric Interconnect.

  4. Simply start using the switching features. The Fabric Interconnect automatically

reconfigures to use Ethernet Switching Mode.

Answer: B

Question No: 9

A customer calls in a trouble ticket and explains that after a power failure, the UPS was discovered to be defective and the Cisco UCS C210 M2 server running Windows 2008 R2 went down without proper shutdown. After restarting the server, you discover the RAID 5 array rebuilding parity. Which write-cache settings on the LSI MegaRAID 9260-4i controller explain this symptom?

  1. write back

  2. write through

  3. write back with BBU

  4. no write cache

  5. no hot spare

Answer: A

Question No: 10

A customer starts an Auto Install upgrade process. During the process, the customer selects the wrong firmware version. Which action rolls back to the previous firmware version as quickly as possible?

  1. Cancel the process by using the Cisco UCS Manager.

  2. Wait for the upgrade to complete, and then roll back the configuration.

  3. Wait for the upgrade to complete, and then downgrade.

  4. Cancel the process by using the CLI.

Answer: C

100% Free Download!
Download Free Demo:642-035 Demo PDF
100% Pass Guaranteed!
Download 2017 EnsurePass 642-035 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 EnsurePass IT Certification PDF and VCE

You must be logged in to post a comment.

Proudly powered by WordPress   Premium Style Theme by www.gopiplus.com