[Free] 2017(Oct) EnsurePass Examcollection Cisco 400-351 Dumps with VCE and PDF 91-100

EnsurePass
2017 Oct Cisco Official New Released 400-351
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/400-351.html

CCIE Wireless (v3.1)

Question No: 91 – (Topic 2)

Harry is a network engineer for a company, he is now upgrading a large autonomous WLAN deployment to LWAPP operation. He has successfully imported a X.509 self-signed certificate into the WLC. But, when he tries to add additional self-signed certificates, the WLC GUI reports a quot;Failed to Add entryquot; error.

Which command can diagnose the root cause of this problem?

  1. Show wps summary

  2. Show database summary

  3. Show exlusionlist

  4. Show sysinfo

Answer: B

Question No: 92 – (Topic 2)

Which description is correct with regard to the operation of an access point in Rogue Location discovery Protocol Mode?

  1. The AP uses the existing wireless infrastructure in order to scan for rogue AP#39;s. Once discovered, these rogues are added to a local list that includes the rogue#39;s BSSIDs, MAC addresses and any discovered security provisions (WPA, WEP etc)

  2. The AP moves to the rogue channel and attempts to connect to the rogue as a client. The AP then tries to obtain an IP address and forwards a UDP packet to the controller through the rogue. If the controller receives this packet, the network administrator is notified that a rogue AP has been discovered on the wired network

  3. The AP detects a rogue client and then the network administrator is able to contain both the rogue AP and the rogue clients. This can be achieved because 802.11 deauthentication packets are sent to clients that are associated to rogue APs so threats such as holes are mitigated

  4. The AP determines whether or not a rogue access point is on a trusted network. It does not provide RF service of any kind but rather receives periodic rogue access point reports from the controller and sniffs all ARP packets. If it finds a match between an ARP request and a MAC address it receives from the controller. It generates a rogue access point alert

to the controller

Answer: B

Question No: 93 – (Topic 2)

legacy 802.11b wireless scanners are begin implemented in your autonomous AP deployment Existing modern clients work fine on the same SSIDs, APs, and channel the legacy scanner are having difficulty maintaining reliable wireless connectivity which AP configured could potential correct this issue

  1. Enable short preamble Dot11Radio0

  2. Disable short preamble Dot11radio1

  3. Disable short preamble dot 11 radio0

  4. Confirm that 802.11n support is disable

  5. Conf1gure globalpreamble negotiation

  6. Enable short preamble on Dot 11Radio1

Answer: C

Question No: 94 – (Topic 2)

There are 5 switches in the network use VTPv3, SW1 and SW2 configured as Server mode. SW1 is the primary server with revision 50. When add a new SW6 with Revision 200, what will happen?

  1. Switch3 updates its own database with the VLAN information received from SW2

  2. VTPv3 configure own database with the VLAN information received from SW1

  3. Switch6 updates its own database with the VLAN information received from SW1

  4. No switch will work

Answer: C

Question No: 95 – (Topic 2)

When creating a guest account on Cisco identity Services Engine .Which option in the sponsor portal allows for the guest credentials to be used for RADIUS authentication without requiring the guest user to log into the guest portal?

  1. Set the Guest role to Guest

  2. Set the Guest role to Activated guest

  3. Set the Time Profile to Radius 1Day

  4. Check the box to send email not send email notification id the guest user name is based on the email address.

Answer: B

Question No: 96 – (Topic 2)

During the startup Wizard process on the Cisco 57760 WLC which two configuration are required within the configuration dialogue to ensure basic network connectivity of the controller to the management network? (choose two)

  1. configuration of the controller Hostname

  2. configuration of the enable secret password

  3. configuration of the network time protocol server

  4. configuration of the GigabitEthernet 0/0 interface

  5. configuration of the wireless management interface

Answer: B,E

Question No: 97 – (Topic 2)

Flexconnect APs have already deployed in a branch office for local switching.Currently the WLAN in the large auditorium is proposed to change to high-density design and thus some low data rates are proposed to be disabled while keeping the data rates in other areas under the same Cisco WLC.Which configuration settings must be modified in the Cisco WLC to achieve this configuration ?(choose two)

  1. FlexconnectgroupS

  2. Mobility groups

  3. AP Groups

  4. RF profiles

Answer: C,D

Question No: 98 – (Topic 2)

How to monitor CPU utilization on a wireless LAN Controller?

  1. Define the network management system and community in the WLC and a matching v1 or v2 community-string in the network management system to enable the WLC CPU OID to be polled

  2. Define the network management system as a trap receiver and enable the default RFC 1213 traps, which include SysCPUUtilization

  3. Define the network management system in the WLC with a matching read-write SNMP community to enable the WLC CPU OID to be polled with an SNMP set by the network management system

  4. Define an external syslog receiver in the WLC that will receive a syslog message when the percentage of CPU processing ability reaches a preconfigured percentage

Answer: A

Question No: 99 – (Topic 2)

What are the three components that are used within the authentication process on an 802.1x/EAP- enabled WLAN? (Choose three.)

  1. wireless web server

  2. supplicant

  3. authenticator

  4. Cisco WCS

  5. authentication server

  6. key management server

Answer: D,E,F

Question No: 100 – (Topic 2)

What are the three fundamental properties that are provided by the antenna of an AP? (Choose three.)

  1. frequency

  2. gain

  3. dB loss

  4. polarization

  5. direction

  6. modulation

Answer: B,D,F

100% Free Download!
Download Free Demo:400-351 Demo PDF
100% Pass Guaranteed!
Download 2017 EnsurePass 400-351 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 EnsurePass IT Certification PDF and VCE

You must be logged in to post a comment.

Proudly powered by WordPress   Premium Style Theme by www.gopiplus.com