[Free] 2017(Oct) EnsurePass Testking Cisco 400-201 Dumps with VCE and PDF 101-110

EnsurePass
2017 Oct Cisco Official New Released 400-201
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/400-201.html

CCIE Service Provider Written Exam (V 4.1)

Question No: 101

Two routers that are running MPLS and LDP have multiple links that than connect them to each other. An engineer wants to ensure that the label bindings are not flushed from the LIB if one of the links fails. Which configuration meets this requirement?

  1. the mpls ldp neighbor targeted command

  2. the mpls ip command on a Cisco MPLS TE tunnel

  3. the mpls ldp autoconfig command

  4. the mpls ldp session protection command

Answer: D

Question No: 102 DRAG DROP

Drag and drop each iACL entry from the left onto its logical order on the right to provider an infrastructure ACL protection on a service provider router

Ensurepass 2017 PDF and VCE

Answer:

Ensurepass 2017 PDF and VCE

Explanation: Deny ipv6 any 2001:… fragments Permit tcp host 2001:…. Host 2001:…..

Deny ipv6 any 2001:…/47 Permit ipv6 any any

Question No: 103

A service provider is in the process of providing Layer 2 and Layer 3 VPN services through a MPLS LDP-enabled backbone. With load increasing in the service provider domain, scalability become the most important. Based on the local label allocation filtering failure, which subnet of prefixes must be selected to meet these requirements?

  1. CE loopbacks only that are used as BGP next hop

  2. PE loopbacks that are used as BGP next hop

  3. RR, P , and PE loopbacks that are used as BGP next hop

  4. all /32 prefixes advertised in the IGP

Answer: B

Question No: 104

In a multihop BFD scenario, which two options create a multihop template and associate it with maps of destinations and associated timers? (Choose two)

  1. Fallover BFD

  2. BFD echo

  3. BFD map

  4. BFD template

  5. BFD version 2

Answer: C,D

Question No: 105 DRAG DROP

An ISP requires an infrastructure ACL protection on an router. Drag and drop each IACL entry on

the left onto its logical order on the right?

Ensurepass 2017 PDF and VCE

Answer:

Ensurepass 2017 PDF and VCE

Explanation:

Ensurepass 2017 PDF and VCE

C:\Users\tgt\Desktop\Data\Untitled.jpg

Question No: 106

Which three configuration sections are required on service provider PE router to enable IPv4 layer 3 VPN? (Choose three)

  1. Configure route targets that are used for importing and exporting customer VRF routes.

  2. Configure route distinguisher that is used for importing and exporting customer VRF routes.

  3. Implement MPLS for all customer-facing links.

  4. Configure the VPNv4 address-family under the MP-BGP configuration mode on the PE routers that participate in the customer VRF routing.

  5. Configure at least one interface that is assigned to a customer link as a member of the VRF

  6. Advertise customer route to all PE router by configure the IPv4 address-family under the MP-BGP configuration mode.

Answer: A,D,E

Question No: 107

Which technology provides fast forwarding path failure detection times for all media types, encapsulations, technologies, and routing protocols?

  1. BFD

  2. MPLS TE

  3. NSF

  4. UDLD

  5. IP Dampening

Answer: A

Question No: 108

An engineer is deploying SShv2-only in-band access. Which three options reflect the minimum configuration to enable the SSHv2 services on Cisco routers? (Choose three)

  1. Define a domain name for the device

  2. Create crypto keys by using the crypto key generate dsa command

  3. Configure a key modules in the global configuration

  4. Add router hostname on DNS services

  5. Define a hostname for the device

  6. Create an access list that defines authorized hosts for SSH

Answer: A,B,E

Question No: 109

A service provider must avoid packet loss when an IGP adjacency is established before the LDP label exchange completes between the peers on that link. Which feature must be implemented that fulfills this requirement?

  1. LDP Session Protection

  2. IP-FRR

  3. MPLS LDP-IGP Sync

  4. MPLS TE Metric

  5. MPLS TE Fast Reroute

Answer: C

Question No: 110

Ensurepass 2017 PDF and VCE

Refer to the exhibit. displays the Router_3 FIB information without any OSPF LSDB optimization. An engineer wants to optimize the OSPF LSDB in accordance with RFC 1587 Considering the following restraints:

*Router_3 maintains full connectivity

*Router_2 requires the least configuration

In orderto achieve the OSPF LSDB optimization on Router_3. which Cisco IOS command should the engineer use on Router_2?

  1. area 1 nssa default-information-originate

  2. area 1nssa no-summary area 1 nssa no-redistribution

  3. area 1 nssa no-redistribution

    area 1 nssa default-information-originate

  4. area 1 nssa no-summary

  5. area 1 nssa no-redistribution

  6. area 1 nssa no-summary

area 1 nssa default-information-originate

Answer: F

100% Free Download!
Download Free Demo:400-201 Demo PDF
100% Pass Guaranteed!
Download 2017 EnsurePass 400-201 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 EnsurePass IT Certification PDF and VCE

You must be logged in to post a comment.

Proudly powered by WordPress   Premium Style Theme by www.gopiplus.com