[Free] 2017(Apr) Ensurepass Examcollection Cisco 400-201 Latest Dumps 161-170

Ensurepass
2017 April Cisco Official New Released 400-201 Q&As
100% Free Download! 100% Pass Guaranteed!
http://www.ensurepass.com/400-201.html

CCIE Service Provider Written Exam v4.1

QUESTION 161

Referring to the exhibit. What could be preventing the R1 router from receiving any prefixes from the R2 BGP neighbor?

 

clip_image002

 

A.

The neighbor 192.168.31.2 next-hop-self command is missing on R2

B.

R1 is using the wrong remote AS number in its neighbor 192.168.31.1 remote-as configuration

C.

There is a TCP session establishment problem between R1 and R2

D.

The no sync command is missing on R1

E.

The no sync command is missing on R2

F.

There is a BGP version mismatch between R1 and R2

 

Correct Answer: B

 

 

QUESTION 162

Which description is true about how remote IP Fast re-route address feature in the ring topology?

 

A.

routers establish an MPLS TE Tunnel with all PQ nodes in the ring

B.

routers establish an MPLS TE Tunnel with both ring edge routers

C.

routers establish targeted LDP Session with the furthest router that is in a PQ space it requires

D.

routers establish a GRE Tunnel with the closet PQ node in the ring

E.

routers establish a GRE Tunnel with the furthest PQ node in the ring

F.

routers establish targeted LDP Session with the closet router that is in a PQ space

 

Correct Answer: F

 

 

QUESTION 163

Which OSPFv3 LSA never flooded beyond the Link?

 

A.

Increment router LSA

B.

Network LSA

C.

Link LSA

D.

Non-area prefix LSA

E.

Router LSA

 

Correct Answer: C

 

 

QUESTION 164

Refer to the exhibit. Which OSPFv3 redistribute configuration provides the equivalent results when redistributing from EIGRP IPv6 prefixes on to OSPFv3 as it happens when redistributing from EIGRP IPv4 prefixes onto OSPFv2?

 

clip_image004

 

A.

ipv6 router ospf 10 redistribute eigrp 10 connected

B.

ipv6 router ospf 10 redistribute eigrp 10

C.

ipv6 router ospf 10 redistribute eigrp 10 include-connected

D.

ipv6 router ospf 10 redistribute eigrp 10 redistribute connected

 

Correct Answer: C

 

 

QUESTION 165

Two switches are connected back-to-back using two Gigabit Ethernet interfaces. These two interfaces are assigned to a port channel in VLAN trunk mode. Which configuration sequence allows the addition of a new VLAN in this link?

 

A.

Add the VLAN to the port channel only, and remove it from the individual links.

B.

Add the VLAN to both the port channel and individual links.

C.

Add the VLW to the port channel only, and it will be reflected on the individual links.

D.

Add the VLAN to the individual links, and it will be reflected on the port channel.

 

Correct Answer: C

 

 

QUESTION 166

Which information is carried in the OSPFv3 intra-area Prefix LSA?

 

A.

All link-local addresses

B.

All IPv6 prefix and topology information that OSPFv2 included in Router LSA and Network LSA

C.

List of options associated with the link to all other routers attached to the link

D.

All prefix-specific information that OSPFv2 included in Router LSA and Network LSA

 

Correct Answer: D

Explanation:

OSPFv3’s new LSA, the Intra-area Prefix LSA (type 9), handles intra-area network information that was previously included in OSPFv2 type 2 LSAs. It is used in order to advertise one or more IPv6 prefixes. The prefixes are associated with router segment, stub network segment or transit network segment. Intra-area prefix LSAs (type 9) & Inter-Area- Prefix-LSA (type 3) carry all IPv6 prefix information, which, in IPv4, is included in router LSAs and network LSAs.

 

 

QUESTION 167

Which three components are included in the Cisco IOS XR infrastructure? (Choose three.)

 

A.

modular line cards

B.

shelf controllers

C.

route processors

D.

service processors

E.

distributed service cards

 

Correct Answer: BCD

 

 

QUESTION 168

Which SDN controller uses Neutron component?

 

A.< /font>

OpenStack

B.

Cisco APIC

C.

OpenDaylight

D.

Etc

 

Correct Answer: A

 

 

QUESTION 169

An operations engineer wants to manually optimize the MPLS Traffic Engineering tunnels. Which Cisco IOS EXEC command should the engineer apply?

 

A.

tunnel mpls traffic-eng autoroute destination

B.

tunnel mpls traffic-eng path-option lowest _number dynamic

C.

mpls traffic-eng reoptimize lockdown

D.

mpls traffic-eng multicast-intact

E.

mpls traffic-eng reoptimize

 

Correct Answer: E

 

 

QUESTION 170

An engineer sees that traffic is not flowing between two line cards on a Cisco ASP 9000 Series device. To troubleshoot this issue, what should the engineer do first?

 

A.

Verify whether LPTS configuration is prohibiting traffic between the two line cards.

B.

Verify whether there are PFM alarms on the line cards and RSPs.

C.

Verify whether there are errors on the EOBCs.

D.

Verify whether there are alarms in the system diagnostics.

 

Correct Answer: B

100% Free Download!
—Download Free Demo:400-201 Demo PDF
100% Pass Guaranteed!
Download 2017 Ensurepass 400-201 Full Exam PDF and VCE Q&As:436
—Get 10% off your purchase! Copy it:8GTC-8UIE-M1SC [2017.04.01-2017.04.30]

Ensurepass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF + VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 Ensurepass IT Certification PDF and VCE

HOT EXAM!
Proudly powered by WordPress   Premium Style Theme by www.gopiplus.com