[Free] 2017(Nov) Dumps4cert Pass4sure Cisco 300-365 Dumps with VCE and PDF 21-30

Dumps4cert
2017 Nov Cisco Official New Released 300-365
100% Free Download! 100% Pass Guaranteed!
http://www.Dumps4cert.com/300-365.html

Deploying Cisco Wireless Enterprise Networks

Question No: 21

Which two options are limitations of using an AP as a workgroup bridge? (Choose two.)

  1. Only factory-configured MAPs can support WGB mode.

  2. MAPs that are configured in WGB mode do not answer S36 radio measurement requests.

  3. A limited subset of Layer 2 security types are supported for wireless clients of a WGB.

  4. There is a limit of 20 wired client devices.

  5. Multiple VLANs are not supported for wireless clients.

Answer: B,D

Question No: 22

A customer has implemented several WLANs in an auditorium utilizing a newly dedicated WLC and is experiencing excessive channel utilization regardless of occupancy. Which action reduces channel utilization without removing SSIDs?

  1. Disable MCS data rates 0 through 11.

  2. Disable MCS data rates used by 40 MHz channels.

  3. Disable data rates that use CCK.

  4. Disable VHT data rates.

Answer: C

Question No: 23

On which AP radio or radios is Cisco WGB association supported?

  1. 2.4 GHz only

  2. 2.4 or 5 GHz only

C. 2.4, 5, or 4.9 GHz

D. 5 GHz only

Answer: B

Question No: 24

What address do PIM routers listen to in order to automatically discover the best RP for each multicast group?

A. 224.0.0.13

B. 224.0.1.39

C. 224.0.0.14

D. 224.0.140

Answer: D

Question No: 25

A customer requires wireless traffic from the branch to be routed through the firewall at corporate headquarters. There is a RADIUS server in each branch location. Which FlexConnect state should be used in this scenario?

  1. local authentication and local switching

  2. local authentication and central switching

  3. central authentication and central switching

  4. central authentication and local switching

Answer: C

Question No: 26

Which statement about when you configure FlexConnect APs and you want to set up Cisco Centralized Key Management fast roaming is true?

  1. FlexConnect groups are required for Cisco Centralized Key Management fast roaming to work with FlexConnect access points.

  2. APs that are in the same FlexConnect group but associated to different WLCs support Cisco Centralized Key Management.

  3. Cisco Centralized Key Management fast roaming among FlexConnect and non- FlexConnect access points is supported.

  4. The FlexConnect access point must be in standalone mode to support Cisco Centralized Key Management.

Answer: A

Question No: 27

Which network is connected by default when connecting to the unused Ethernet port of a MAP?

  1. the native VLAN that the MAP is connected to

  2. the VLAN that is associated with WLAN number 1 in the WLC

  3. the native VLAN that the WLC is connected to

  4. the VLAN that is associated with the SSID that the MAPs are communicating on

Answer: A

Question No: 28

CMX Facebook WiFi can allow access to the network before authentication. Which two of the following options are available? (Choose two)

  1. Allow all the traffic before authentication and intercept HTTPs only.

  2. Allow HTTP traffic only before authentication and block all the traffic.

  3. Allow SNMP traffic only before authentication and block all the traffic.

  4. Allow all the traffic before authentication and intercept HTTP only.

  5. Allow HTTPs traffic only before authentication and block all other traffic.

Answer: B,D

Question No: 29

An engineer used an interface group under the SSID configuration, but noticed that a test client is getting an IP assigned in a different VLAN from the DHCP server. Which two options override the interface group configuration on the SSID? (Choose two.)

  1. static VLAN on client

  2. ACL

  3. AP group

  4. static IP on client

  5. MAC filtering

  6. RF group

  7. AAA override

Answer: C,G

Question No: 30

After a wireless deployment, users report that wireless voice clients are experiencing an unacceptable amount of delay while roaming during a call on the Cisco Unified 7925 Series phones. The customer environment consists of multiple controllers, all running 7.4.121.0 code, operating in a centralized deployment. What configuration issue is most likely contributing to the problem?

  1. The authentication should be set to WPA2-PSK to allow for 802.11n speeds for the Cisco Unified 7925 phones.

  2. The access points on that floor are all on one controller and should be load balanced evenly across multiple controllers.

  3. The access points for that floor are salt and peppered across multiple controllers and should be moved to the primary controller.

  4. The wireless phones are operating in the 2 4 GHz band and should be configured for the 5 GHz band.

Answer: B

100% Free Download!
Download Free Demo:300-365 Demo PDF
100% Pass Guaranteed!
Download 2017 Dumps4cert 300-365 Full Exam PDF and VCE

Dumps4cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 Dumps4cert IT Certification PDF and VCE

You must be logged in to post a comment.

Proudly powered by WordPress   Premium Style Theme by www.gopiplus.com