[Free] 2017(Apr) Ensurepass Testking Cisco 210-065 Latest Dumps 61-70

Ensurepass
2017 April Cisco Official New Released 210-065 Q&As
100% Free Download! 100% Pass Guaranteed!
http://www.ensurepass.com/210-065.html

Implementing Cisco Video Network Devices (CIVND)

 

QUESTION 61

In this item, you will need to use all information presented to you to successfully answer the question.

 

clip_image002

clip_image004

clip_image006

 

The C-Series endpoint (codec) does not register with the Video Communication Server that is located in a different network. Based on the exhibits, what could be causing the issue?

 

A.

The subnet mask on the codec is incorrect.

B.

The ip address of the codec is incorrect.

C.

The interface that the codec is in is in the wrong VLAN.

D.

The codec did not receive a DHCP address from the DHCP server.

 

Correct Answer: A

Explanation:

The subnet mask configured on the codec is 255.255.255.128, when it should be 255.255.255.0.

 

 

QUESTION 62

A video engineer needs to locate the running version of the Cisco VCS. Under which tab in the Cisco VCS web interface is this information contained?

 

A.

Applications

B.

Status

C.

System

D.

Configuration

Correct Answer: B

 

 

QUESTION 63

Refer to the exhibit. Which option performs a factory reset of a Cisco TelePresence System endpoint?

 

clip_image007

 

A.

Configuration > System Settings

B.

Configuration > Security Settings

C.

Troubleshooting > Hardware setup

D.

Monitoring

E.

Troubleshooting > Configuration Issues

F.

Troubleshooting > System Restart

G.

A Cisco TelePresence System endpoint can be reset only via CLI.

 

Correct Answer: E

 

 

QUESTION 64

What is the importance of defining option 150 in the DHCP server for Cisco TelePresence endpoints?

 

A.

Option 150 is not important.

B.

It is the TFTP server IPv4 address where the video endpoint retrieves its configuration file while booting.

C.

It is the IPv4 address of the default gateway for the subnet that the video endpoint is connected to.

D.

It is the configured SIP registrar and proxy server.

E.

It is the unique NTP server IPv4 address.

 

Correct Answer: B

 

 

QUESTION 65

Which two methods can be used to set the default call protocol of a Cisco TelePresence endpoint running TelePresence codec firmware? (Choose two.)

&nbs
p;

A.

Use the GUI and set System > H.323 > Settings > Default Call Protocol > H.323.

B.

Use the CLI command xConfiguration Conference 1 DefaultCall Protocol: H323.

C.

Use the CLI command Conference Default Protocol: H323.

D.

Use the CLI command Default Protocol: H323.

E.

Use the GUI and set Configuration > System Configuration > Conference > DefaultCall > H.323.

 

Correct Answer: BE

 

 

QUESTION 66

A customer requests a configuration that enables users to easily add a third party to an existing call. The environment contains only three Cisco TelePresence C40 codecs and one Cisco VCS. To achieve the customer’s requirements, which feature should be added?

 

A.

Cisco MultiWay

B.

Cisco TelePresence Conductor

C.

Cisco TMS

D.

Cisco Multisite

E.

Cisco VCS Expressway

 

Correct Answer: D

 

 

QUESTION 67

A technician enters the diag system normal command for a Cisco TelePresence System endpoint. Which action must be done in the CLI before entering this command?

 

A.

Logging must be enabled.

B.

Calling services must be stopped.

C.

All forced upgrades must be cleared.

D.

The Telephone_Srvr service must be restarted.

 

Correct Answer: B

 

 

QUESTION 68

Which all-in-one dual-screen solution can be used for an average meeting room without the need for external monitors?

 

A.

MX700

B.

MX300G2

C.

EX90

D.

SX80

E.

TX9000

F.

MX200G2

 

Correct Answer: A

 

 

QUESTION 69

Refer to the exhibit. Which system tab can be used to add video infrastructure devices and endpoints?

 

clip_image009

 

A.

Navigator

B.

System Overview

C.

Configuration Templates

D.

Provisioning

E.

Administrative Tools

 

Correct Answer: A

 

 

QUESTION 70

An engineer wants to know if there is a way to determine the optical zoom of a Cisco TelePresence SX20 remotely. Which two methods will retrieve this information? (Choose two.)

 

A.

From the CLI, run xstatus.

B.

From the CLI, run xconfig.

C.

From the web GUI, choose Configuration > System Status > Camera.

D.

From the web GUI, choose Configuration> Camera > Status.

E.

From CLI, run xcommand camera.

 

Correct Answer: AC

 

100% Free Download!
—Download Free Demo:210-065 Demo PDF
100% Pass Guaranteed!
Download 2017 Ensurepass 210-065 Full Exam PDF and VCE Q&As:269
—Get 10% off your purchase! Copy it:8GTC-8UIE-M1SC [2017.04.01-2017.04.30]

Ensurepass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF + VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 Ensurepass IT Certification PDF and VCE

HOT EXAM!
Proudly powered by WordPress   Premium Style Theme by www.gopiplus.com