[Free] 2017(Sep) EnsurePass Examcollection Cisco 200-601 Dumps with VCE and PDF 11-20

EnsurePass
2017 Sep Cisco Official New Released 200-601
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/200-601.html

Managing Industrial Networking for Manufacturing with Cisco Technologies

Question No: 11

Given the CIA triad elements, which ensures first that the data is encrypted and secure, second that the data is trustworthy, and third that the data is accessible by those who need it?

  1. CIA

  2. ICA

  3. ACI

  4. CAI

Answer: A

Question No: 12

Which statement is true regarding ProfiSAFE?

  1. ProfiSAFE traffic must be carried on a network that is physically separated from automation traffic

  2. ProfiSAFE relies on the error detection mechanisms of Ethernet and TCP/IP to determine if there are network errors

  3. ProfiSAFE can be used in safety applications up to Safety Integrity Level 3 (SIL3)

  4. ProfiSAFE is only used by ProfiBUS PA and ProfiBUS DA devices

    Answer: C

    Question No: 13

    Refer to exhibit. The administrator has configured the following device IP settings, but did not keep track of which ports the devices were connected to. The administrator is able to ping each device but needs to update the network documentation to include the switch and interface where each device is connected. The administrator does not want to walk to each device and switch to track down the information.

    Ensurepass 2017 PDF and VCE

    Which steps below would you execute in sequence to document the switch and interface where each device is connected?

    1. View the ARP table on L3SW1

    2. View the ARP table on the administrator#39;s station

    3. View the ARP table on L2SW4

    4. PING all the devices

    5. View the MAC address table on all switches

    6. View the MAC address table on the administrator#39;s station

A. 2,4,5

B. 2,5,4

C. 4,3,6

D. 4,1,5

Answer: D

Question No: 14

Refer to the exhibit.

Ensurepass 2017 PDF and VCE

NAT has been configured on the router #39;GW#39; and the IP addresses of router #39;GW#39; have been configured properly. Users of PC1 and PC2 are able to ping the IP address 198.51.100.1 but are unable to reach any other IP addresses on the Internet. The ISP confirmed that their configuration is correct. Which option would likely correct the problem?

  1. ip access-list extended ACL_OUTBOUND permit ip 10.1.1.0 0.0.0.255 any

    interface Ethernet1

    ip access-group ACL_OUTBOUND out

  2. interface Ethernet1 ip nat outside

  3. interface Ethernet0 ip nat inside

D. ip route 0.0.0.0 0.0.0.0 198.51.100.1

Answer: D

Question No: 15

Refer to the exhibit.

Ensurepass 2017 PDF and VCE

What issue does this topology present for the represented traffic flow?

  1. Standard Produce/Consume traffic is not suitable for an 802.11 wireless environment.

  2. Only one of the Work Group Bridges can transmit at a time, because 802.11 is half duplex.

  3. The Converged Plant-wide Ethernet best practices for 802.11 wireless don#39;t allow for PAC to PAC traffic.

  4. I/O control traffic should utilize the 2.4 GHz band based on best practices.

Answer: B

Question No: 16

What security component can be deployed to increase the defense in depth and specifically can be positioned against #39;man-in-the-middle#39; attack?

  1. Deploy 802.1AE

  2. Deploy 802.1X

  3. Deploy 802.1Q

  4. Deploy 802.1AX

Answer: A

Question No: 17

Which configuration enables an Industrial Ethernet switch to participate in PTP clock selection and sets the priority value that would break the tie between switches with matching default criteria to 50?

  1. ptp mode boundary ptp priority1 10

    ptp priority2 50

  2. ptp mode boundary ptp priority1 50

    ptp priority2 10

  3. ptp mode e2etransparent ptp priority1 50

    ptp priority2 10

  4. ptp mode e2etransparent ptp priority1 10

ptp priority2 50

Answer: A

Question No: 18

Which CLI command will display IGMP snooping information in a Cisco IE2000 or Stratix 5700 switch?

  1. switch#show snooping ip igmp

  2. switch#show igmp snooping

  3. switch#show ip igmp snooping

  4. switch#show ip snooping

Answer: C

Question No: 19

Refer to the exhibit.

Ensurepass 2017 PDF and VCE

SW1, SW2 and virtual switch are connected in a loop. SW1 and SW2 are standard layer-2 switches. Which loop prevention mechanism is best suited for use within this topology?

  1. Per-VLAN Rapid Spanning Tree Protocol

  2. End-Host Mode

  3. Multi-chassis EtherChannel

  4. BPDU Guard

    Answer: B

    Question No: 20

    Refer to the exhibit.

    Ensurepass 2017 PDF and VCE

    Network Faceplates have not been installed on the HMI and so you need to map a network based on information available from RSLinx. Which most accurately represents the network configuration?

    A.

    B.

    C.

    D.

    Answer: B

    100% Free Download!
    Download Free Demo:200-601 Demo PDF
    100% Pass Guaranteed!
    Download 2017 EnsurePass 200-601 Full Exam PDF and VCE

    EnsurePass ExamCollection Testking
    Lowest Price Guarantee Yes No No
    Up-to-Dated Yes No No
    Real Questions Yes No No
    Explanation Yes No No
    PDF VCE Yes No No
    Free VCE Simulator Yes No No
    Instant Download Yes No No

    2017 EnsurePass IT Certification PDF and VCE

You must be logged in to post a comment.

Proudly powered by WordPress   Premium Style Theme by www.gopiplus.com